Pass Guarantee 400-101 Exam By Taking CertBus New Cisco 400-101 VCE And PDF Braindumps
CertBus 2017 Latest Cisco 400-101 CCIE Exam VCE and PDF Dumps for Free Download!
☆ 400-101 CCIE Exam PDF and VCE Dumps : 828QAs Instant Download: https://www.certgod.com/400-101.html [100% 400-101 Exam Pass Guaranteed or Money Refund!!]
☆ Free view online pdf on CertBus free test 400-101 PDF: https://www.certgod.com/online-pdf/400-101.pdf
☆ CertBus 2017 Latest 400-101 CCIE exam Question PDF Free Download from Google Drive Share: https://drive.google.com/file/d/0B_3QX8HGRR1mdEpkTFZvSDJDc2c/view?usp=sharing
Following 400-101 828QAs are all new published by Cisco Official Exam Center
How to pass Hotest 400-101 vce exam easily with less time? CertBus provides the most valid Oct 29,2017 Latest 400-101 pdf exam preparation material to boost your success rate in Cisco CCIE Latest 400-101 pdf CCIE Routing and Switching Written v5.0 exam. If you are one of the successful candidates with CertBus Newest 400-101 free download PDF and VCEs, do not hesitate to share your reviews on our Cisco CCIE materials.
CertBus – find all popular 400-101 exam certification study materials here. our expert team is ready to help you to get your certification easily. 400-101 study guide | 400-101 prep | 400-101 exams questions | the 400-101 exam. latest 400-101 exam dumps. get your certification easily- CertBus. CertBus expert team is will help you to get all 400-101 certifications easily.
We CertBus has our own expert team. They selected and published the latest 400-101 preparation materials from Cisco Official Exam-Center: https://www.certgod.com/400-101.html
QUESTION NO:1
Which two commands are required to enable multicast on a router, knowing that the receivers only
support IGMPv2? (Choose two.)
A. ip pim rp-address
B. ip pim ssm
C. ip pim sparse-mode
D. ip pim passive
Answer: A,C
Explanation:
Sparse mode logic (pull mode) is the opposite of Dense mode logic (push mode), in Dense mode
it is supposed that in every network there is someone who is requesting the multicast traffic so
PIM-DM routers begin by flooding the multicast traffic out of all their interfaces except those from
where a prune message is received to eliminate the
QUESTION NO:6
Why would a rogue host that is running a DHCP server on a campus LAN network present a
security risk?
A. It may allocate IP addresses from an unknown subnet to the users.
B. All multicast traffic can be sniffed by using the DHCP multicast capabilities.
C. The CPU utilization of the first hop router can be overloaded by exploiting DHCP relay open
ports.
D. A potential man-in-the-middle attack can be used against the clients.
Answer: D
Explanation:
QUESTION NO:8
Which statement is true about loop guard?
A. Loop guard only operates on interfaces that are considered point-to-point by the spanning tree.
B. Loop guard only operates on root ports.
C. Loop guard only operates on designated ports.
D. Loop guard only operates on edge ports.
Answer: A
Explanation:
Explanation
Understanding How Loop Guard Works
Unidirectional link failures may cause a root port or alternate port to become designated as root if
BPDUs are absent. Some software failures may introduce temporary loops in the network. Loop
guard checks if a root port or an alternate root port receives BPDUs. If the port is receiving
BPDUs, loop guard puts the port into an inconsistent state until it starts receiving BPDUs again.
Loop guard isolates the failure and lets spanning tree converge to a stable topology without the
failed link or bridge.
You can enable loop guard per port with the set spantree guard loop command.
Note When you are in MST mode, you can set all the ports on a switch with the set spantree
global-defaults loop-guard command.
When you enable loop guard, it is automatically applied to all of the active instances or VLANs to
which that port belongs. When you disable loop guard, it is disabled for the specified ports.
Disabling loop guard moves all loop-inconsistent ports to the listening state.
If you enable loop guard on a channel and the first link becomes unidirectional, loop guard blocks
the entire channel until the affected port is removed from the channel. Figure 8-6 shows loop
guard in a triangle switch configuration.
Figure 8-6 Triangle Switch Configuration with Loop Guard
Figure 8-6 illustrates the following configuration:
Switches A and B are distribution switches.
Switch C is an access switch.
Loop guard is enabled on ports 3/1 and 3/2 on Switches A, B, and C.
Use loop guard only in topologies where there are blocked ports. Topologies that have no blocked
ports, which are loop free, do not need to enable this feature. Enabling loop guard on a root switch
has no effect but provides protection when a root switch becomes a nonroot switch.
Follow these guidelines when using loop guard:
Do not enable loop guard on PortFast-enabled or dynamic VLAN ports.
Do not enable PortFast on loop guard-enabled ports.
Do not enable loop guard if root guard is enabled.
Do not enable loop guard on ports that are connected to a shared link.
Note: We recommend that you enable loop guard on root ports and alternate root ports on access
switches.
Loop guard interacts with other features as follows:
Loop guard does not affect the functionality of UplinkFast or BackboneFast.
Root guard forces a port to always be designated as the root port. Loop guard is effective only if
the port is a root port or an alternate port. Do not enable loop guard and root guard on a port at the
same time.
PortFast transitions a port into a forwarding state immediately when a link is established. Because
a PortFast-enabled port will not be a root port or alternate port, loop guard and PortFast cannot be
configured on the same port. Assigning dynamic VLAN membership for the port requires that the
port is PortFast enabled. Do not configure a loop guard-enabled port with dynamic VLAN
membership.
If your network has a type-inconsistent port or a PVID-inconsistent port, all BPDUs are dropped
until the misconfiguration is corrected. The port transitions out of the inconsistent state after the
message age expires. Loop guard ignores the message age expiration on type-inconsistent ports
and PVID-inconsistent ports. If the port is already blocked by loop guard, misconfigured BPDUs
that are received on the port make loop guard recover, but the port is moved into the type-
inconsistent state or PVID-inconsistent state.
In high-availability switch configurations, if a port is put into the blocked state by loop guard, it
remains blocked even after a switchover to the redundant supervisor engine. The newly activated
supervisor engine recovers the port only after receiving a BPDU on that port.
Loop guard uses the ports known to spanning tree. Loop guard can take advantage of logical ports
provided by the Port Aggregation Protocol (PAgP). However, to form a channel, all the physical
ports grouped in the channel must have compatible configurations. PAgP enforces uniform
configurations of root guard or loop guard on all the physical ports to form a channel.
These caveats apply to loop guard:
QUESTION NO:12
Which two options are contained in a VTP subset advertisement? (Choose two.)
A. followers field
B. MD5 digest
C. VLAN information
D. sequence number
Answer: C,D
Explanation:
Subset Advertisements
When you add, delete, or change a VLAN in a Catalyst, the server Catalyst where the changes are
made increments the configuration revision and issues a summary advertisement. One or several
subset advertisements follow the summary advertisement. A subset advertisement contains a list
of VLAN information.
If there are several VLANs, more than one subset advertisement can be required in order to
advertise all the VLANs.
Subset Advertisement Packet Format
This formatted example shows that each VLAN information field contains information for a different
VLAN. It is ordered so that lowered-valued ISL VLAN IDs occur first:
Most of the fields in this packet are easy to understand. These are two clarifications:
Code
QUESTION NO:14
Which three options are features of VTP version 3? (Choose three.)
A. VTPv3 supports 8K VLANs.
B. VTPv3 supports private VLAN mapping.
C. VTPv3 allows for domain discovery.
D. VTPv3 uses a primary server concept to avoid configuration revision issues.
E. VTPv3 is not compatible with VTPv1 or VTPv2.
F. VTPv3 has a hidden password option.
Answer: B,D,F
Explanation:
Key Benefits of VTP Version 3
Much work has gone into improving the usability of VTP version 3 in three major areas:
The new version of VTP offers better administrative control over which device is allowed to update
other devices’ view of the VLAN topology. The chance of unintended and disruptive changes is
significantly reduced, and availability is increased. The reduced risk of unintended changes will
ease the change process and help speed deployment.
Functionality for the VLAN environment has been significantly expanded. Two enhancements are
most beneficial for today’s networks:
400-101 Practice Test400-101 Study Guide400-101 Braindumps
QUESTION NO:19
Which two options does Cisco PfR use to control the entrance link selection with inbound
optimization? (Choose two.)
A. Prepend extra AS hops to the BGP prefix.
B. Advertise more specific BGP prefixes (longer mask).
C. Add (prepend) one or more communities to the prefix that is advertised by BGP.
D. Have BGP dampen the prefix.
Answer: A,C
Explanation: PfR Entrance Link Selection Control Techniques
The PfR BGP inbound optimization feature introduced the ability to influence inbound traffic. A
network advertises reachability of its inside prefixes to the Internet using eBGP advertisements to
its ISPs. If the same prefix is advertised to more than one ISP, then the network is multihoming.
PfR BGP inbound optimization works best with multihomed networks, but it can also be used with
a network that has multiple connections to the same ISP. To implement BGP inbound
optimization, PfR manipulates eBGP advertisements to influence the best entrance selection for
traffic bound for inside prefixes. The benefit of implementing the best entrance selection is limited
to a network that has more than one ISP connection.
To enforce an entrance link selection, PfR offers the following methods:
BGP Autonomous System Number Prepend When an entrance link goes out-of-policy (OOP) due
to delay, or in images prior to Cisco IOS Releases 15.2(1) T1 and 15.1(2)S, and PfR selects a
best entrance for an inside prefix, extra autonomous system hops are prepended one at a time (up
to a maximum of six) to the inside prefix BGP advertisement over the other entrances. In Cisco
IOS Releases 15.2(1)T1, 15.1(2)S, and later releases, when an entrance link goes out-of policy
(OOP) due to unreachable or loss reasons, and PfR selects a best entrance for an inside prefix,
six extra autonomous system hops are prepended immediately to the inside prefix BGP
advertisement over the other entrances. The extra autonomous system hops on the other
entrances increase the probability that the best entrance will be used for the inside prefix. When
the entrance link is OOP due to unreachable or loss reasons, six extra autonomous system hops
are added immediately to allow the software to quickly move the traffic away from the old entrance
link. This is the default method PfR uses to control an inside prefix, and no user configuration is
required.
BGP Autonomous System Number Community Prepend
When an entrance link goes out-of-policy (OOP) due to delay, or in images prior to Cisco IOS
Releases 15.2
(1)T1 and 15.1(2)S, and PfR selects a best entrance for an inside prefix, a BGP prepend
community is attached one at a time (up to a maximum of six) to the inside prefix BGP
advertisement from the network to another autonomous system such as an ISP. In Cisco IOS
Releases 15.2(1)T1, 15.1(2)S, and later releases, when an entrance link goes out-of-policy (OOP)
due to unreachable or loss reasons, and PfR selects a best entrance for an inside prefix, six BGP
prepend communities are attached to the inside prefix BGP advertisement. The BGP prepend
community will increase the number of autonomous system hops in the advertisement of the
inside prefix from the ISP to its peers. Autonomous system prepend BGP community is the
preferred method to be used for PfR BGP inbound optimization because there is no risk of the
local ISP filtering the extra autonomous system hops. There are some issues, for example, not all
ISPs support the BGP prepend community, ISP policies may ignore or modify the autonomous
system hops, and a transit ISP may filter the autonomous system path. If you use this method of
inbound optimization and a change is made to an autonomous system, you must issue an
outbound reconfiguration using the “clear ip bgp” command.
Reference
http://www.cisco.com/en/US/docs/ios-xml/ios/pfr/configuration/15-2s/pfr-bgp-inbound.html#GUID-
F8A59E241D59-
4924-827D-B23B43D9A8E0
http://www.cisco.com/en/US/products/ps8787/products_ios_protocol_option_home.html
QUESTION NO:21
Refer to the exhibit.
A packet from RTD with destination RTG, is reaching RTB. What is the path this packet will take
from RTB to reach RTG?
A. RTB – RTA – RTG
B. RTB – RTD – RTC – RTA – RTG
C. RTB – RTF – RTE – RTA – RTG
D. RTB will not be able to reach RTG since the OSPF configuration is wrong.
Answer: C
Explanation:
QUESTION NO:24
Refer to the exhibit.
R1 is not learning about the 172.16.10.0 subnet from the BGP neighbor R2 (209.165.202.130).
What can be done so that R1 will learn about this network?
A. Disable auto-summary on R2.
B. Configure an explicit network command for the 172.16.10.0 subnet on R2.
C. Subnet information cannot be passed between IBGP peers.
D. Disable auto-summary on R1.
Answer: B
Explanation:
By default, BGP does not accept subnets redistributed from IGP. To advertise and carry subnet
routes in BGP, use an explicit network command or the no auto-summary command. If you disable
auto-summarization and have not entered a network command, you will not advertise network
routes for networks with subnet routes unless they contain a summary route.
Reference
http://www.cisco.com/en/US/docs/ios/11_3/np1/command/reference/1rbgp.html
QUESTION NO:30
What is the flooding scope of an OSPFv3 LSA, if the value of the S2 bit is set to 1 and the S1 bit is
set to 0?
A. link local
B. area wide
C. AS wide
D. reserved
Answer: C
Explanation:
The Type 1 router LSA is now link local and the Type 2 Network LSA is AS Wide
S2 and S1 indicate the LSA’s flooding scope. Table 9-1 shows the possible values of these two
bits and the associated flooding scopes.
Table 9-1 S bits in the OSPFv3 LSA Link State Type field and their associated flooding scopes
LSA Function Code, the last 13 bits of the LS Type field, corresponds to the OSPFv2 Type field.
Table 9-2 shows the common LSA types used by OSPFv3 and the values of their corresponding
LS Types. If you decode the hex values, you will see that the default U bit of all of them is 0. The S
bits of all LSAs except two indicate area scope. Of the remaining two, AS External LSAs have an
AS flooding scope and Link LSAs have a linklocal flooding scope. Most of the OSPFv3 LSAs have
functional counterparts in OSPFv2; these OSPFv2 LSAs and their types are also shown in Table
9-2.
Table 9-2 OSPFv3 LSA types and their OSPFv2 counterparts
Reference
http://www.networkworld.com/subnets/cisco/050107-ch9-ospfv3.html?page=1
QUESTION NO:31
How will EIGRPv6 react if there is an IPv6 subnet mask mismatch between the Global Unicast
addresses on a point-to-point link?
A. EIGRPv6 will form a neighbor relationship.
B. EIGRPv6 will not form a neighbor relationship.
C. EIGRPv6 will form a neighbor relationship, but with the log MSG: “EIGRPv6 neighbor not on a
common subnet.”
D. EIGRPv6 will form a neighbor relationship, but routes learned from that neighbor will not be
installed in the routing table.
Answer: A Explanation:
http://www.ietf.org/rfc/rfc3587.txt
CertBus exam braindumps are pass guaranteed. We guarantee your pass for the 400-101 exam successfully with our Cisco materials. CertBus CCIE Routing and Switching Written v5.0 exam PDF and VCE are the latest and most accurate. We have the best Cisco in our team to make sure CertBus CCIE Routing and Switching Written v5.0 exam questions and answers are the most valid. CertBus exam CCIE Routing and Switching Written v5.0 exam dumps will help you to be the Cisco specialist, clear your 400-101 exam and get the final success.
400-101 Latest questions and answers on Google Drive(100% Free Download): https://drive.google.com/file/d/0B_3QX8HGRR1mdEpkTFZvSDJDc2c/view?usp=sharing
400-101 Cisco exam dumps (100% Pass Guaranteed) from CertBus: https://www.certgod.com/400-101.html [100% Exam Pass Guaranteed]
Why select/choose CertBus?
Millions of interested professionals can touch the destination of success in exams by certgod.com. products which would be available, affordable, updated and of really best quality to overcome the difficulties of any course outlines. Questions and Answers material is updated in highly outclass manner on regular basis and material is released periodically and is available in testing centers with whom we are maintaining our relationship to get latest material.