CertBus 2018 Real Cisco 400-101 CCIE Exam VCE and PDF Dumps for Free Download!
☆ 400-101 CCIE Exam PDF and VCE Dumps : 1436QAs Instant Download: https://www.certgod.com/400-101.html [100% 400-101 Exam Pass Guaranteed or Money Refund!!]
☆ Free view online pdf on CertBus free test 400-101 PDF: https://www.certgod.com/online-pdf/400-101.pdf
☆ CertBus 2018 Real 400-101 CCIE exam Question PDF Free Download from Google Drive Share: https://drive.google.com/file/d/0B_3QX8HGRR1mdEpkTFZvSDJDc2c/view?usp=sharing
Following 400-101 1436QAs are all new published by Cisco Official Exam Center
CertBus provides the most up to date and accurate preparing materials of the CCIE Oct 27,2018 Newest 400-101 exam questions certification exam Q and A , testing software, exam PDF and VCE files to help you prepare your CCIE Newest 400-101 free download CCIE Routing and Switching Written v5.0 exam. What training you are looking for? Come to visit our site and choose CertBus online certification materials, you will get a quick and cost-efficient way to become a Cisco CCIE certified professional in IT industry.
CertBus – pass all 400-101 certification exams easily with our real exam practice. latest update and experts revised. CertBus exam guide: pass the 400-101 exam on your first attempt! association of certification 400-101 exam resources – CertBus. CertBus test prep guides to pass your 400-101 exam. you are only successful with 400-101 testing engine in your it certification – CertBus!
We CertBus has our own expert team. They selected and published the latest 400-101 preparation materials from Cisco Official Exam-Center: https://www.certgod.com/400-101.html
QUESTION NO:4
Refer to the exhibit.
R1 has an EBGP session to ISP 1 and an EBGP session to ISP 2. R1 receives the same prefixes
through both links.
Which configuration should be applied so that the link between R1 and ISP 2 will be preferred for
outgoing traffic (R1 to ISP 2)?
A. Increase local preference on R1 for received routes
B. Decrease local preference on R1 for received routes
C. Increase MED on ISP 2 for received routes
D. Decrease MED on ISP 2 for received routes
Answer: A
Explanation: Explanation
Local preference is an indication to the AS about which path has preference to exit the AS in order
to reach a certain network. A path with higher local preference is preferred more. The default value
of preference is 100.
Reference
http://www.cisco.com/en/US/tech/tk872/technologies_configuration_example09186a0080b82d1f.s
html?
referring_site=smartnavRD
QUESTION NO:6
Why would a rogue host that is running a DHCP server on a campus LAN network present a
security risk?
A. It may allocate IP addresses from an unknown subnet to the users.
B. All multicast traffic can be sniffed by using the DHCP multicast capabilities.
C. The CPU utilization of the first hop router can be overloaded by exploiting DHCP relay open
ports.
D. A potential man-in-the-middle attack can be used against the clients.
Answer: D
Explanation:
QUESTION NO:13
Which two statements are true about traffic shaping? (Choose two.)
A. Out-of-profile packets are queued.
B. It causes TCP retransmits.
C. Marking/remarking is not supported.
D. It does not respond to BECN and ForeSight Messages.
E. It uses a single/two-bucket mechanism for metering.
Answer: A,C
Explanation:
QUESTION NO:14
Which three options are features of VTP version 3? (Choose three.)
A. VTPv3 supports 8K VLANs.
B. VTPv3 supports private VLAN mapping.
C. VTPv3 allows for domain discovery.
D. VTPv3 uses a primary server concept to avoid configuration revision issues.
E. VTPv3 is not compatible with VTPv1 or VTPv2.
F. VTPv3 has a hidden password option.
Answer: B,D,F
Explanation:
Key Benefits of VTP Version 3
Much work has gone into improving the usability of VTP version 3 in three major areas:
The new version of VTP offers better administrative control over which device is allowed to update
other devices’ view of the VLAN topology. The chance of unintended and disruptive changes is
significantly reduced, and availability is increased. The reduced risk of unintended changes will
ease the change process and help speed deployment.
Functionality for the VLAN environment has been significantly expanded. Two enhancements are
most beneficial for today’s networks:
QUESTION NO:16
In 802.1s, how is the VLAN to instance mapping represented in the BPDU?
A. The VLAN to instance mapping is a normal 16-byte field in the MST BPDU.
B. The VLAN to instance mapping is a normal 12-byte field in the MST BPDU.
C. The VLAN to instance mapping is a 16-byte MD5 signature field in the MST BPDU.
D. The VLAN to instance mapping is a 12-byte MD5 signature field in the MST BPDU.
Answer: C
Explanation:
MST Configuration and MST Region
Each switch running MST in the network has a single MST configuration that consists of these
three attributes:
1. An alphanumeric configuration name (32 bytes)
2. A configuration revision number (two bytes)
3. A 4096-element table that associates each of the potential 4096 VLANs supported on the
chassis to a given instance.
In order to be part of a common MST region, a group of switches must share the same
configuration attributes.
It is up to the network administrator to properly propagate the configuration throughout the region.
Currently, this step is only possible by the means of the command line interface (CLI) or through
Simple Network
Management Protocol (SNMP). Other methods can be envisioned, as the IEEE specification does
not explicitly mention how to accomplish that step.
Note: If for any reason two switches differ on one or more configuration attribute, the switches are
part of different regions. For more information refer to the Region Boundary section of this
document.
Region Boundary
In order to ensure consistent VLAN-to-instance mapping, it is necessary for the protocol to be able
to exactly identify the boundaries of the regions. For that purpose, the characteristics of the region
are included in the BPDUs. The exact VLANs-to-instance mapping is not propagated in the BPDU,
because the switches only need to know whether they are in the same region as a neighbor.
Therefore, only a digest of the VLANs-toinstance mapping table is sent, along with the revision
number and the name. Once a switch receives a BPDU, the switch extracts the digest (a
numerical value derived from the VLAN-to-instance mapping table through a mathematical
function) and compares this digest with its own computed digest. If the digests differ, the port on
which the BPDU was received is at the boundary of a region.
In generic terms, a port is at the boundary of a region if the designated bridge on its segment is in
a different region or if it receives legacy 802.1d BPDUs. In this diagram, the port on B1 is at the
boundary of region A, whereas the ports on B2 and B3 are internal to region B:
MST Instances
According to the IEEE 802.1s specification, an MST bridge must be able to handle at least these
two instances:
One Internal Spanning Tree (IST)
One or more Multiple Spanning Tree Instance(s) (MSTIs)
The terminology continues to evolve, as 802.1s is actually in a pre-standard phase. It is likely
these names will change in the final release of 802.1s. The Cisco implementation supports 16
instances: one IST (instance 0) and 15 MSTIs.
show vtp status
Cisco switches “show vtp status” Field Descriptions has a MD5 digest field that is a 16-byte
checksum of the
VTP configuration as shown below
Router# show vtp status
VTP Version: 3 (capable)
Configuration Revision: 1
Maximum VLANs supported locally: 1005
Number of existing VLANs: 37
VTP Operating Mode: Server
VTP Domain Name: [smartports]
VTP Pruning Mode: Disabled
VTP V2 Mode: Enabled
VTP Traps Generation: Disabled
MD5 digest : 0x26 0xEE 0x0D 0x84 0x73 0x0E 0x1B 0x69
Configuration last modified by 172.20.52.19 at 7-25-08 14:33:43
Local updater ID is 172.20.52.19 on interface Gi5/2 (first layer3 interface fou)
VTP version running: 2
Reference
http://www.cisco.com/en/US/tech/tk389/tk621/technologies_white_paper09186a0080094cfc.shtml
http://www.cisco.com/en/US/docs/ios-xml/ios/lanswitch/command/lsw-cr-book.pdf
400-101 VCE Dumps400-101 Practice Test400-101 Braindumps
QUESTION NO:17
Which three combinations are valid LACP configurations that will set up a channel? (Choose
three.)
A. On/On
B. On/Auto
C. Passive/Active
D. Desirable/Auto
E. Active/Active
F. Desirable/Desirable
Answer: A,C,E
Explanation:
QUESTION NO:26
Refer to the exhibit.
Why is AS 65333 in parentheses?
A. It is an external AS.
B. It is a confederation AS.
C. It is the AS of a route reflector.
D. It is our own AS.
E. A route map has been applied to this route.
F. The BGP next hop is unreachable.
Answer: B
Explanation:
QUESTION NO:33
Which two OSPF LSA types are new in OSPF version 3? (Choose two.)
A. Link
B. NSSA external
C. Network link
D. Intra-area prefix
E. AS domain
Answer: A,D
Explanation:
New LSA Types
OSPFv3 carries over the seven basic LSA types we’re familiar with from OSPFv2. However, the
type 1 and 2 LSAs have been re-purposed, as will be discussed in a bit. OSPFv3 also introduces
two new LSA types: Link and Intra-area Prefix.
Reference
http://packetlife.net/blog/2010/mar/2/ospfv2-versus-ospfv3/
QUESTION NO:37
Which command can be used on a PE router to connect to a CE router (11.1.1.4) in VRF red?
A. telnet 11.1.1.4 /vrf-source red
B. telnet 11.1.1.4 source /vrf red
C. telnet 11.1.1.4 /source vrf red
D. telnet 11.1.1.4 /vrf red
E. telnet 11.1.1.4 vrf red
Answer: D
Explanation:
Telnetting can be done through the VRF using the Management Ethernet interface. In the
following example, the router telnets to 172.17.1.1 through the Management Ethernet interface
VRF:
Router# telnet 172.17.1.1 /vrf Mgmt-intf
Reference
http://www.cisco.com/en/US/docs/routers/asr1000/configuration/guide/chassis/Management_Ether
net.html
QUESTION NO:43
Which two multicast address ranges are assigned as source-specific multicast destination
addresses and are reserved for use by source-specific applications and protocols? (Choose two.)
A. 232.0.0.0/8
B. 239.0.0.0/8
C. 232.0.0.0/4
D. FF3x::/32
E. FF2x::/32
F. FF3x::/16
Answer: A,D
Explanation: Source-specific multicast (SSM) is a method of delivering multicast packets in which
the only packets that are delivered to a receiver are those originating from a specific source
address requested by the receiver. By so limiting the source, SSM reduces demands on the
network and improves security.
SSM requires that the receiver specify the source address and explicitly excludes the use of the (*,
G) join for all multicast groups in RFC 3376, which is possible only in IPv4’s IGMPv3 and IPv6’s
MLDv2.
Source-specific multicast is best understood in contrast to any-source multicast (ASM). In the
ASM service model a receiver expresses interest in traffic to a multicast address. The multicast
network must
1. discover all multicast sources sending to that address, and
2. route data from all sources to all interested receivers.
This behavior is particularly well suited to groupware applications where
1. all participants in the group want to be aware of all other participants, and
2. the list of participants is not known in advance.
The source discovery burden on the network can become significant when the number of sources
is large.
In the SSM service model, in addition to the receiver expressing interest in traffic to a multicast
address, the receiver expresses interest in receiving traffic from only one specific source sending
to that multicast address.
This relieves the network of discovering many multicast sources and reduces the amount of
multicast routing information that the network must maintain.
SSM requires support in last-hop routers and in the receiver’s operating system. SSM support is
not required in other network components, including routers and even the sending host. Interest in
multicast traffic from a specific source is conveyed from hosts to routers using IGMPv3 as
specified in RFC 4607.
SSM destination addresses must be in the ranges 232.0.0.0/8 for IPv4 or FF3x::/96 for IPv6.
Reference
http://en.wikipedia.org/wiki/Source-specific_multicast
CertBus exam braindumps are pass guaranteed. We guarantee your pass for the 400-101 exam successfully with our Cisco materials. CertBus CCIE Routing and Switching Written v5.0 exam PDF and VCE are the latest and most accurate. We have the best Cisco in our team to make sure CertBus CCIE Routing and Switching Written v5.0 exam questions and answers are the most valid. CertBus exam CCIE Routing and Switching Written v5.0 exam dumps will help you to be the Cisco specialist, clear your 400-101 exam and get the final success.
400-101 Latest questions and answers on Google Drive(100% Free Download): https://drive.google.com/file/d/0B_3QX8HGRR1mdEpkTFZvSDJDc2c/view?usp=sharing
400-101 Cisco exam dumps (100% Pass Guaranteed) from CertBus: https://www.certgod.com/400-101.html [100% Exam Pass Guaranteed]
Why select/choose CertBus?
Millions of interested professionals can touch the destination of success in exams by certgod.com. products which would be available, affordable, updated and of really best quality to overcome the difficulties of any course outlines. Questions and Answers material is updated in highly outclass manner on regular basis and material is released periodically and is available in testing centers with whom we are maintaining our relationship to get latest material.