CertBus 2018 Latest Cisco 400-101 CCIE Exam VCE and PDF Dumps for Free Download!
☆ 400-101 CCIE Exam PDF and VCE Dumps : 1436QAs Instant Download: https://www.certgod.com/400-101.html [100% 400-101 Exam Pass Guaranteed or Money Refund!!]
☆ Free view online pdf on CertBus free test 400-101 PDF: https://www.certgod.com/online-pdf/400-101.pdf
☆ CertBus 2018 Latest 400-101 CCIE exam Question PDF Free Download from Google Drive Share: https://drive.google.com/file/d/0B_3QX8HGRR1mdEpkTFZvSDJDc2c/view?usp=sharing
Following 400-101 1436QAs are all new published by Cisco Official Exam Center
As a leading IT exam study material provider, CertBus not only provides you the Newest 400-101 vce dumps exam questions and answers but also the most comprehensive knowledge of the whole CCIE Nov 24,2018 Hotest 400-101 vce dumps CCIE Routing and Switching Written v5.0 certifications. We provide our users with the most accurate Latest 400-101 study guide CCIE Routing and Switching Written v5.0 study material about the CCIE Latest 400-101 pdf dumps exam and the guarantee of pass. We assist you to get well prepared for CCIE Newest 400-101 free download certification which is regarded valuable the IT sector.
CertBus 100% latest and accurate real 400-101 exam questions and answers. get all 400-101 certification easily! pass your 400-101 exam in 1 day with CertBus. CertBus 100% accurate exam brain dumps with latest update. download the free 400-101 demo to check first. CertBus – the most professional provider of all 400-101 certifications. pass all the 400-101 exam easily.
We CertBus has our own expert team. They selected and published the latest 400-101 preparation materials from Cisco Official Exam-Center: https://www.certgod.com/400-101.html
QUESTION NO:12
Which two options are contained in a VTP subset advertisement? (Choose two.)
A. followers field
B. MD5 digest
C. VLAN information
D. sequence number
Answer: C,D
Explanation:
Subset Advertisements
When you add, delete, or change a VLAN in a Catalyst, the server Catalyst where the changes are
made increments the configuration revision and issues a summary advertisement. One or several
subset advertisements follow the summary advertisement. A subset advertisement contains a list
of VLAN information.
If there are several VLANs, more than one subset advertisement can be required in order to
advertise all the VLANs.
Subset Advertisement Packet Format
This formatted example shows that each VLAN information field contains information for a different
VLAN. It is ordered so that lowered-valued ISL VLAN IDs occur first:
Most of the fields in this packet are easy to understand. These are two clarifications:
Code
QUESTION NO:17
Which three combinations are valid LACP configurations that will set up a channel? (Choose
three.)
A. On/On
B. On/Auto
C. Passive/Active
D. Desirable/Auto
E. Active/Active
F. Desirable/Desirable
Answer: A,C,E
Explanation:
QUESTION NO:18
Refer to the exhibit.
Which statement is correct about the prefix 160.0.0.0/8?
A. The prefix has encountered a routing loop.
B. The prefix is an aggregate with an as-set.
C. The prefix has been aggregated twice, once in AS 100 and once in AS 200.
D. None of these statements is true.
Answer: B
Explanation:
QUESTION NO:20
Refer to the exhibit.
What is the potential issue with this configuration?
A. There is no potential issue; OSPF will work fine in any condition.
B. Sub-optimal routing may occur since there is no area 1 adjacency between the ABRs.
C. This is a wrong OSPF configuration because all routers must be in area 0 only.
D. This is a wrong OSPF configuration because /30 requires 0.0.0.3 wild card.
Answer: B
Explanation:
QUESTION NO:21
Refer to the exhibit.
A packet from RTD with destination RTG, is reaching RTB. What is the path this packet will take
from RTB to reach RTG?
A. RTB – RTA – RTG
B. RTB – RTD – RTC – RTA – RTG
C. RTB – RTF – RTE – RTA – RTG
D. RTB will not be able to reach RTG since the OSPF configuration is wrong.
Answer: C
Explanation:
Latest 400-101 Dumps400-101 Practice Test400-101 Exam Questions
QUESTION NO:24
Refer to the exhibit.
R1 is not learning about the 172.16.10.0 subnet from the BGP neighbor R2 (209.165.202.130).
What can be done so that R1 will learn about this network?
A. Disable auto-summary on R2.
B. Configure an explicit network command for the 172.16.10.0 subnet on R2.
C. Subnet information cannot be passed between IBGP peers.
D. Disable auto-summary on R1.
Answer: B
Explanation:
By default, BGP does not accept subnets redistributed from IGP. To advertise and carry subnet
routes in BGP, use an explicit network command or the no auto-summary command. If you disable
auto-summarization and have not entered a network command, you will not advertise network
routes for networks with subnet routes unless they contain a summary route.
Reference
http://www.cisco.com/en/US/docs/ios/11_3/np1/command/reference/1rbgp.html
QUESTION NO:39
Which two statements are correct about Nonstop Forwarding? (Choose two.)
A. It allows the standby RP to take control of the device after a hardware or software fault on the
active RP.
B. It is a Layer 3 function that works with SSO to minimize the amount of time a network is
unavailable to users following a switchover.
C. It is supported by the implementation of EIGRP, OSPF, RIPv2, and BGP protocols.
D. It synchronizes startup configuration, startup variables, and running configuration.
E. The main objective of NSF is to continue forwarding IP packets following a switchover.
F. Layer 2 802.1w or 802.1s must be used, as 802.1d cannot process the Layer 2 changes.
G. Routing protocol tuning parameters must be the same as the NSF parameters, or failover will
be inconsistent.
Answer: B,E
Explanation: Explanation
Cisco Nonstop Forwarding (NSF) works with the Stateful Switchover (SSO) feature in Cisco IOS
software. NSF works with SSO to minimize the amount of time a network is unavailable to its
users following a switchover. The main objective of Cisco NSF is to continue forwarding IP
packets following a Route Processor (RP) switchover.
Reference
http://www.cisco.com/en/US/docs/ios/12_2s/feature/guide/fsnsf20s.html
QUESTION NO:43
Which two multicast address ranges are assigned as source-specific multicast destination
addresses and are reserved for use by source-specific applications and protocols? (Choose two.)
A. 232.0.0.0/8
B. 239.0.0.0/8
C. 232.0.0.0/4
D. FF3x::/32
E. FF2x::/32
F. FF3x::/16
Answer: A,D
Explanation: Source-specific multicast (SSM) is a method of delivering multicast packets in which
the only packets that are delivered to a receiver are those originating from a specific source
address requested by the receiver. By so limiting the source, SSM reduces demands on the
network and improves security.
SSM requires that the receiver specify the source address and explicitly excludes the use of the (*,
G) join for all multicast groups in RFC 3376, which is possible only in IPv4’s IGMPv3 and IPv6’s
MLDv2.
Source-specific multicast is best understood in contrast to any-source multicast (ASM). In the
ASM service model a receiver expresses interest in traffic to a multicast address. The multicast
network must
1. discover all multicast sources sending to that address, and
2. route data from all sources to all interested receivers.
This behavior is particularly well suited to groupware applications where
1. all participants in the group want to be aware of all other participants, and
2. the list of participants is not known in advance.
The source discovery burden on the network can become significant when the number of sources
is large.
In the SSM service model, in addition to the receiver expressing interest in traffic to a multicast
address, the receiver expresses interest in receiving traffic from only one specific source sending
to that multicast address.
This relieves the network of discovering many multicast sources and reduces the amount of
multicast routing information that the network must maintain.
SSM requires support in last-hop routers and in the receiver’s operating system. SSM support is
not required in other network components, including routers and even the sending host. Interest in
multicast traffic from a specific source is conveyed from hosts to routers using IGMPv3 as
specified in RFC 4607.
SSM destination addresses must be in the ranges 232.0.0.0/8 for IPv4 or FF3x::/96 for IPv6.
Reference
http://en.wikipedia.org/wiki/Source-specific_multicast
QUESTION NO:44
How is RPF used in multicast routing?
A. to prevent multicast packets from looping
B. to prevent PIM packets from looping
C. to instruct PIM where to send a (*, G) or (S, G) join message
D. to prevent multicast packets from looping and to instruct PIM where to send a (*, G) or (S, G)
join message
Answer: D
Explanation:
QUESTION NO:45
Refer to the exhibit.
What does the incoming interface of the above (*, G) entry indicate?
A. the interface closest to the source, according to the unicast routing table
B. the interface where an IGMP join has been received
C. the interface with the highest IP address
D. the last interface to hear a PIM (*, G) join
E. the interface closest to the RP, according to the unicast routing table
Answer: E
Explanation:
Source Trees
A source tree is the simplest form of distribution tree. The source host of the multicast traffic is
located at the root of the tree, and the receivers are located at the ends of the branches. Multicast
traffic travels from the source host down the tree toward the receivers. The forwarding decision on
which interface a multicast packet should be transmitted out is based on the multicast forwarding
table. This table consists of a series of multicast state entries that are cached in the router. State
entries for a source tree use the notation (S, G) pronounced S comma G. The letters represents
the IP address of the source, and G represents the group address.
Shared Trees
Shared trees differ from source trees in that the root of the tree is a common point somewhere in
the network.
This common point is referred to as the rendezvous point (RP). The RP is the point at which
receivers join to learn of active sources. Multicast sources must transmit their traffic to the RP.
When receivers join a multicast group on a shared tree, the root of the tree is always the RP, and
multicast traffic is transmitted from the RP down toward the receivers. Therefore, the RP acts as a
go-between for the sources and receivers. An RP can be the root for all multicast groups in the
network, or different ranges of multicast groups can be associated with different RPs.
Multicast forwarding entries for a shared tree use the notation (*, G), which is pronounced star
comma G. This is because all sources for a particular group share the same tree. (The multicast
groups go to the same RP.)
Therefore, the * or wildcard represents all sources.
Additional Information from Microsoft
Multicast traffic from source 162.10.4.1 (for example) uses the RPT, meaning the source sends it
to the RP rather than to the multicast group (the router would denote this by having a (*, G) entry
rather than a (S, G) entry). Before sending this traffic, Router 1 checks its unicast routing table to
see if packets from the RP are arriving on the correct interface. In this case they are, because they
arrive on interface I1, and the packets are forwarded.
Reference
http://technet.microsoft.com/en-us/library/bb742462.aspx
CertBus exam braindumps are pass guaranteed. We guarantee your pass for the 400-101 exam successfully with our Cisco materials. CertBus CCIE Routing and Switching Written v5.0 exam PDF and VCE are the latest and most accurate. We have the best Cisco in our team to make sure CertBus CCIE Routing and Switching Written v5.0 exam questions and answers are the most valid. CertBus exam CCIE Routing and Switching Written v5.0 exam dumps will help you to be the Cisco specialist, clear your 400-101 exam and get the final success.
400-101 Latest questions and answers on Google Drive(100% Free Download): https://drive.google.com/file/d/0B_3QX8HGRR1mdEpkTFZvSDJDc2c/view?usp=sharing
400-101 Cisco exam dumps (100% Pass Guaranteed) from CertBus: https://www.certgod.com/400-101.html [100% Exam Pass Guaranteed]
Why select/choose CertBus?
Millions of interested professionals can touch the destination of success in exams by certgod.com. products which would be available, affordable, updated and of really best quality to overcome the difficulties of any course outlines. Questions and Answers material is updated in highly outclass manner on regular basis and material is released periodically and is available in testing centers with whom we are maintaining our relationship to get latest material.