[PDF and VCE] Free CertBus Cisco 400-101 PDF Real Exam Questions and Answers Free Download
CertBus 2018 Newest Cisco 400-101 CCIE Exam VCE and PDF Dumps for Free Download!
☆ 400-101 CCIE Exam PDF and VCE Dumps : 1436QAs Instant Download: https://www.certgod.com/400-101.html [100% 400-101 Exam Pass Guaranteed or Money Refund!!]
☆ Free view online pdf on CertBus free test 400-101 PDF: https://www.certgod.com/online-pdf/400-101.pdf
☆ CertBus 2018 Newest 400-101 CCIE exam Question PDF Free Download from Google Drive Share: https://drive.google.com/file/d/0B_3QX8HGRR1mdEpkTFZvSDJDc2c/view?usp=sharing
Following 400-101 1436QAs are all new published by Cisco Official Exam Center
This is a note. Please give me your attention if you are preparing for your Cisco Latest 400-101 study guide exam. It is really a tough task to pass CCIE Dec 07,2018 Newest 400-101 vce dumps exam. However, CertBus will help you on that with the most comprehensive PDF and VCEs of the latest CCIE Newest 400-101 practice exam questions, covering each and every aspect of CCIE Hotest 400-101 QAs CCIE Routing and Switching Written v5.0 exam curriculum.
CertBus – provide the latest 400-101 real exam practice questions and answers. CertBus – latest update source for all 400-101 certification exams. CertBus brain dumps | perfect certification sample questions | free braindumps 400-101 exam certification . pass 400-101 exam | 400-101 written test | 400-101 exam study guide | 400-101 exam tips.
We CertBus has our own expert team. They selected and published the latest 400-101 preparation materials from Cisco Official Exam-Center: https://www.certgod.com/400-101.html
QUESTION NO:10
Which command is used to enable EtherChannel hashing for Layer 3 IP and Layer 4 port-based
CEF?
A. mpls ip cef
B. port-channel ip cef
C. mpls ip port-channel cef
D. port-channel load balance
E. mpls ip load-balance
F. ip cef EtherChannel channel-id XOR L4
G. ip cef connection exchange
Answer: D
Explanation:
QUESTION NO:11
When you are troubleshooting duplex mismatches, which two errors are typically seen on the full-
duplex end? (Choose two.)
A. runts
B. FCS errors
C. interface resets
D. late collisions
Answer: A,B
Explanation:
QUESTION NO:27
Refer to the exhibit.
What triggered the first SPF recalculation?
A. changes in a router LSA, subnet LSA, and external LSA
B. changes in a router LSA, summary network LSA, and external LSA
C. changes in a router LSA, summary network LSA, and summary ASBR LSA
D. changes in a router LSA, summary ASBR LSA, and external LSA
Answer: B
Explanation:
OSPFv2
Is built around links, and any IP prefix change in an area will trigger a full SPF. It advertises IP
information in Router and Network LSAs. The routers thus, advertise both the IP prefix information
(or the connected subnet information) and topology information in the same LSAs. This implies
that if an IP address attached to an interface changes, OSPF routers would have to originate a
Router LSA or a Network LSA, which btw also carries the topology information. This would trigger
a full SPF on all routers in that area, since the same LSAs are flooded to convey topological
change information. This can be an issue with an access router or the one sitting at the edge,
since many stub links can change regularly.
Only changes in interarea, external and NSSA routes result in partial SPF calculation (since type
3, 4, 5 and 7 LSAs only advertise IP prefix information) and thus IS-IS
QUESTION NO:32
Which two tunneling techniques support IPv6 multicasting? (Choose two.)
A. 6to4
B. 6over4
C. ISATAP
D. 6PE
E. GRE
Answer: B,E
Explanation:
When IPv6 multicast is supported (over a 6to4 tunnel), an IPv6 multicast routing protocol must be
used
Restrictions for Implementing IPv6 Multicast
IPv6 multicast for Cisco IOS software uses MLD version 2. This version of MLD is fully backward-
compatible with MLD version 1 (described in RFC 2710). Hosts that support only MLD version 1
will interoperate with a router running MLD version 2. Mixed LANs with both MLD version 1 and
MLD version 2 hosts are likewise supported.
IPv6 multicast is supported only over IPv4 tunnels in Cisco IOS Release 12.3(2)T, Cisco IOS
Release 12.2
(18)S, and Cisco IOS Release 12.0(26)S.
When the bidirectional (bidir) range is used in a network, all routers in that network must be able to
understand the bidirectional range in the bootstrap message (BSM).
IPv6 multicast routing is disabled by default when the ipv6 unicast-routing command is configured.
On Cisco Catalyst 6500 and Cisco 7600 series routers, the ipv6 multicast-routing also must be
enabled in order to use IPv6 unicast routing
Reference http://www.cisco.com/web/about/ac123/ac147/ac174/ac197/
about_cisco_ipj_archive_article09186a00800c830a.html
http://www.cisco.com/en/US/docs/ios/ipv6/configuration/guide/ip6-multicast.html
https://supportforums.cisco.com/thread/183386
QUESTION NO:34
In order to maintain security, with which hop count are IPv6 neighbor discovery packets sent?
A. 0
B. 1
C. 255
D. 256
Answer: C
Explanation:
400-101 VCE Dumps400-101 Practice Test400-101 Exam Questions
QUESTION NO:35
Which command will define a VRF with name ‘CCIE’ in IPv6?
A. ip vrf CCIE
B. ipv6 vrf CCIE
C. vrf definition CCIE
D. ipv6 vrf definition CCIE
Answer: C
Explanation:
QUESTION NO:37
Which command can be used on a PE router to connect to a CE router (11.1.1.4) in VRF red?
A. telnet 11.1.1.4 /vrf-source red
B. telnet 11.1.1.4 source /vrf red
C. telnet 11.1.1.4 /source vrf red
D. telnet 11.1.1.4 /vrf red
E. telnet 11.1.1.4 vrf red
Answer: D
Explanation:
Telnetting can be done through the VRF using the Management Ethernet interface. In the
following example, the router telnets to 172.17.1.1 through the Management Ethernet interface
VRF:
Router# telnet 172.17.1.1 /vrf Mgmt-intf
Reference
http://www.cisco.com/en/US/docs/routers/asr1000/configuration/guide/chassis/Management_Ether
net.html
QUESTION NO:39
Which two statements are correct about Nonstop Forwarding? (Choose two.)
A. It allows the standby RP to take control of the device after a hardware or software fault on the
active RP.
B. It is a Layer 3 function that works with SSO to minimize the amount of time a network is
unavailable to users following a switchover.
C. It is supported by the implementation of EIGRP, OSPF, RIPv2, and BGP protocols.
D. It synchronizes startup configuration, startup variables, and running configuration.
E. The main objective of NSF is to continue forwarding IP packets following a switchover.
F. Layer 2 802.1w or 802.1s must be used, as 802.1d cannot process the Layer 2 changes.
G. Routing protocol tuning parameters must be the same as the NSF parameters, or failover will
be inconsistent.
Answer: B,E
Explanation: Explanation
Cisco Nonstop Forwarding (NSF) works with the Stateful Switchover (SSO) feature in Cisco IOS
software. NSF works with SSO to minimize the amount of time a network is unavailable to its
users following a switchover. The main objective of Cisco NSF is to continue forwarding IP
packets following a Route Processor (RP) switchover.
Reference
http://www.cisco.com/en/US/docs/ios/12_2s/feature/guide/fsnsf20s.html
QUESTION NO:40
Which three fields are optional in an OSPFv3 external LSA? (Choose three.)
A. Forwarding Address
B. External Route
C. Reference Link-State ID
D. Option
E. Prefix Options
Answer: A,B,C
Explanation:
AS-External LSA
As with OSPFv2, the AS-External LSA advertises prefixes external to the OSPF routing domain;
one LSA is required for each external prefix advertised. However, the format of the OSPFv3 As-
External LSA (Figure 9-10) is different from its OSPFv2 counterpart.
Figure 9-10. OSPFv3 AS-External LSA
Reference
http://fengnet.com/book/CCIE Professional Development Routing TCPIP Volu
me I/images/09fig10_alt.jpg
QUESTION NO:47
Apart from interdomain multicast routing, what else is MSDP used for?
A. Source Specific Multicast and IGMPv2
B. Announcing multicast sources to BGP speakers
C. Anycast RP
D. Intradomain multicast routing
Answer: C
Explanation:
Reference
http://www.cisco.com/en/US/docs/ios/12_2/ip/configuration/
guide/1cfmsdp_ps1835_TSD_Products_Configuration_Guide_Chapter.html
CertBus exam braindumps are pass guaranteed. We guarantee your pass for the 400-101 exam successfully with our Cisco materials. CertBus CCIE Routing and Switching Written v5.0 exam PDF and VCE are the latest and most accurate. We have the best Cisco in our team to make sure CertBus CCIE Routing and Switching Written v5.0 exam questions and answers are the most valid. CertBus exam CCIE Routing and Switching Written v5.0 exam dumps will help you to be the Cisco specialist, clear your 400-101 exam and get the final success.
400-101 Latest questions and answers on Google Drive(100% Free Download): https://drive.google.com/file/d/0B_3QX8HGRR1mdEpkTFZvSDJDc2c/view?usp=sharing
400-101 Cisco exam dumps (100% Pass Guaranteed) from CertBus: https://www.certgod.com/400-101.html [100% Exam Pass Guaranteed]
Why select/choose CertBus?
Millions of interested professionals can touch the destination of success in exams by certgod.com. products which would be available, affordable, updated and of really best quality to overcome the difficulties of any course outlines. Questions and Answers material is updated in highly outclass manner on regular basis and material is released periodically and is available in testing centers with whom we are maintaining our relationship to get latest material.