Pass 70-417 Exam By Practicing CertBus Latest 70-417 VCE and PDF Braindumps

Do not worry about that if you are stuck in the 70-417 exam difficulties, CertBus will assist you all your way through the 70-417 exam with the most update 70-417 PDF and VCE dumps. CertBus exam 70-417 preparation materials are the most comprehensive material, covering every key knowledge of 70-417 exam.

We CertBus has our own expert team. They selected and published the latest 70-417 preparation materials from Official Exam-Center: http://www.certgod.com/

QUESTION NO:16

Your network contains an Active Directory domain named adatum.com. The domain contains a

member server named Server1 and a domain controller named DC2. All servers run Windows Server

2012 R2.

On DC2, you open Server Manager and you add Server1 as another server to manage.

From Server Manager on DC2, you right-click Server1 as shown in the exhibit. (Click the Exhibit

button.)

C:UsersAlpolinkAppDataLocalTempmsohtmlclip11clip_image006.jpg

You need to ensure that when you right-click Server1, you see the option to run the DHCP console.

What should you do?

A. On DC2, install the Role Administration Tools.

B. On DC2 and Server1, run winrmquickconfig.

C. In the domain, add DC2 to the DHCP Administrators group.

D. On Server1, install the Feature Administration Tools.

Answer: B

Explanation:

Remote Mgmt must be setup on both servers to allow you to run the DHCP console.

Incorrect answers:

A: To run the Server1 DHCP console from DC2 you must make sure that both those servers are

remote management enabled.

B: The scenario only mentions a Server1 and DC2.

D: You need both computers in the question to be set up for remote management.

References:

http://technet.microsoft.com/en-us/library/ee441255(v=ws.10).aspx

QUESTION NO:43

HOTSPOT

Your network contains an Active Directory forest named contoso.com. The forest contains a single

domain. The forest contains two Active Directory sites named Site1 and Site2.

You plan to deploy a read-only domain controller (RODC) named DC10 to Site2. You pre-create the

DC10 domain controller account by using Active Directory Users and Computers.

You need to identify which domain controller will be used for initial replication during the promotion

of the RODC.

Which tab should you use to identify the domain controller?

To answer, select the appropriate tab in the answer area.

C:UsersAlpolinkAppDataLocalTempmsohtmlclip11clip_image020.jpg

Answer:

C:UsersAlpolinkAppDataLocalTempmsohtmlclip11clip_image021.jpg

QUESTION NO:8

You have a server named Server1 that runs Windows Server 2012 R2. Server1 has following storage

spaces:

. Data

. Users

. Backups

. Primordial

You add an additional hard disk to Server1.

You need to identify which storage space contains the new hard disk.

Which storage space contains the new disk?

A. Primordial

B. Data

C. Backups

D. Users

Answer: A

Explanation:

New Disks (Unallocated space) added to Primordial space.

Incorrect answers:

A: It cannot be in the Data storage space as it is a new disk that has just been added.

C: It is a new disk that had been added and will thus not be found under the Users storage space.

D: This is a new disk that has just been added, it does not contain Backups and will thus not be in this

storage space since it is not in the primordial storage space.

References:

http://blogs.technet.com/b/canitpro/archive/2012/12/13/storage-pools-dive-right-in.aspx

QUESTION NO:31

HOTSPOT

Your network contains an Active Directory domain named contoso.com. The domain contains a

server named Print1.

C:UsersAlpolinkAppDataLocalTempmsohtmlclip11clip_image016.jpg

C:UsersAlpolinkAppDataLocalTempmsohtmlclip11clip_image017.jpg

Your company implements DirectAccess.

A user named User1 frequently works at a customer’s office. The customer’s office contains a print

server named Print1.

While working at the customer’s office, User1 attempts to connect to Print1. User1 connects to the

Print1 server in contoso.com instead of the Print1 server at the customer’s office.

You need to provide User1 with the ability to connect to the Print1 server in the customer’s office.

Which Group Policy option should you configure?

To answer, select the appropriate option in the answer area.

Answer:

QUESTION NO:49

Your network contains an Active Directory domain named contoso.com. The domain contains two

servers named Server1 and Server2. Both servers have the IP Address Management (IPAM) Server

feature installed.

You have a support technician named Tech1. Tech1 is a member of the IPAM Administrators group

on Server1 and Server2.

You need to ensure that Tech1 can use Server Manager on Server1 to manage IPAM on Server2.

To which group on Server2 should you add Tech1?

A. WinRMRemoteWMIUsers_

B. IPAM MSM Administrators

C. Remote Management Users

D. IPAM Administrators

Answer: C

Explanation:

A. IPAM MSM Administrators can’t access remotely

B. IPAM Administrators can’t access remotely

C. If you are accessing the IPAM server remotely using Server Manager IPAM client RSAT, then you

must be a member of the WinRMRemoteWMIUsers group on the IPAM server, in addition to being a

member of the appropriate IPAM security group (or local Administrators group).

http://msdn.microsoft.com/en-us/library/windows/desktop/aa384295(v=vs.85).aspx

http://www.microsoft.com/en-us/download/details.aspx?id=29012

QUESTION NO:4

Your network contains a server named Server1 that runs Windows Server 2012. Server1 has the

Hyper-V server role installed.

Server1 hosts four virtual machines named VM1, VM2, VM3, and VM4.

Server1 is configured as shown in the following table.

VM3 is used to test applications.

You need to prevent VM3 from synchronizing its clock to Server1.

What should you configure?

A. NUMA topology

B. Resource control

C. Resource metering

D. Virtual Machine Chimney

E. The VLAN ID

F. Processor Compatibility

G. The startup order

H. Automatic Start Action

I. Integration Services

J. Port mirroring

K. Single-root I/O virtualization

Answer: I

Explanation:

Integration Services settings on virtual machines includes services such as operating system

shutdown, time synchronization, data exchange, Heart beat, and Backup (volume snapshot services.

Thus you should disable the time synchronization using Integration Services.

Incorrect answers:

A: NUMA spanning is a processor setting that works by projecting a virtual NUMA topology to the

guest operating system in a way that is optimized to match the NUMA topology of the underlying

physical host machine. The effect is to provide virtual machines with additional computing resources

for high-performance server applications such as Microsoft SQL Server and modern server operating

systems such as Windows Server 2012 that include built-in NUMA optimizations.

B: Resource control in used in the event where you need to adjust the computing resources of a

virtual machine, you can reconfigure the resources to meet the changing needs. You can also specify

resource controls to automate how resources are allocated to virtual machines.

C: Resource metering includes:

. Average CPU usage, measured in megahertz over a period of time.

. Average physical memory usage, measured in megabytes.

. Minimum memory usage (lowest amount of physical memory).

. Maximum memory usage (highest amount of physical memory).

. Maximum amount of disk space allocated to a virtual machine.

. Total incoming network traffic, measured in megabytes, for a virtual network adapter.

. Total outgoing network traffic, measured in megabytes, for a virtual network adapter

D: Virtual Machine Chimney or TCP Chimney Offload as it is also known, transfers Transmission

Control Protocol (TCP) traffic processing, such as packet segmentation and reassembly processing

tasks, from a computer

QUESTION NO:20

Your network contains an Active Directory domain named contoso.com. The domain contains two

member servers named Server1 and Server2 that run Windows Server 2012 R2.

You log on to Server1.

You need to retrieve the IP configurations of Server2.

Which command should you run from Server1?

A. winrm get server2

B. dsquery . -scope base -attrip/server2

C. winrs -r:server2ipconfig

D. ipconfig> server2.ip

Answer: C

C:UsersAlpolinkAppDataLocalTempmsohtmlclip11clip_image008.jpg

Explanation:

Windows Remote Management allows you to manage and execute programs remotely

Incorrect answers:

B. winrm is the server side services for remote mgmt

C. This command will not display the IP configurations.

D. Would output server1 ipconfig info to server2.ip file

References:

Exam Ref 70-410: Installing and Configuring Windows Server 2012: Objective 4.3: Deploy and

Configure the DNS service, Chapter 4 Deploying and Configuring core network services, p. 246

http://technet.microsoft.com/en-us/library/dd349801(v=ws.10).aspx

QUESTION NO:42

Your network contains an Active Directory domain named contoso.com. The domain contains a

domain controller named DC1 that runs Windows Server 2012 R2.

You create an Active Directory snapshot of DC1 each day.

You need to view the contents of an Active Directory snapshot from two days ago.

What should you do first?

A. Start the Volume Shadow Copy Service (VSS).

B. Run the dsamain.exe command.

C. Run the ntdsutil.exe command.

D. Stop the Active Directory Domain Services (AD DS) service.

Answer: C

Explanation:

Mounting an Active Directory snapshot

Before connecting to the snapshot we need to mount it. By looking at the results of the List All

command in step #8 above, identify the snapshot that you wish to mount, and note the number next

to it.

In order to mount an Active Directory snapshot follow these steps:

Log on as a member of the Domain Admins group to one of your Windows Server 2008 Domain

Controllers.

Open a Command Prompt window by clicking on the CMD shortcut in the Start menu, or by typing

CMD and pressing Enter in the Run or Quick Search parts of the Start menu.

Note: You must run NTDSUTIL from an elevated command prompt. To open an elevated command

prompt, click Start, right-click Command Prompt, and then click Run as administrator.

In the CMD window, type the following command:

ntdsutil

In the CMD window, type the following command:

snapshot

To view all available snapshots, in the CMD window, type the following command:

list all The result should look like this:

snapshot: List All

1: 2008/10/25:03:14 {ec53ad62-8312-426f-8ad4-d47768351c9a}

2: C: {15c6f880-cc5c-483b-86cf-8dc2d3449348}

In this example we only have one snapshot available, one from 2008/10/25 at 03:14AM (yes, I write

articles at this timeQUESTION NO:11

Your network contains an Active Directory forest named contoso.com.

The forest contains two domains named contoso.com and child.contoso.com and two sites named

Site1 and Site2. The domains and the sites are configured as shown in following table.

When the link between Site1 and Site2 fails, users fail to log on to Site2.

You need to identify what prevents the users in Site2 from logging on to the child.contoso.com

domain.

What should you identify?

A. The placement of the infrastructure master

B. The placement of the global catalog server

C. The placement of the domain naming master

C:UsersAlpolinkAppDataLocalTempmsohtmlclip11clip_image004.jpg

D. The placement of the PDC emulator

Answer: D

Explanation:

The exhibit shows that Site2 does not have a PDC emulator. This is important because of the close

interaction between the RID operations master role and the PDC emulator role

The PDC emulator processes password changes from earlier-version clients and other domain

controllers on a best-effort basis; handles password authentication requests involving passwords

that have recently changed and not yet been replicated throughout the domain; and, by default,

synchronizes time. If this domain controller cannot connect to the PDC emulator, this domain

controller cannot process authentication requests, it may not be able to synchronize time, and

password updates cannot be replicated to it.

Incorrect answers:

A: The global catalogue server role placement is not the issue.

C: The PDC emulator role, not the infrastructure master role will process authentication requests

that will allow logging on for the Site2 users.

D: The domain naming master role is not the role that prevents Site2 users from logging on to the

child domain.

References:

http://technet.microsoft.com/en-us/library/dd391870(v=ws.10).aspx

http://technet.microsoft.com/en-us/library/cc773108(v=ws.10).aspx

QUESTION NO:46

Your network contains an Active Directory forest named adatum.com. All servers run Windows

Server 2012 R2. The domain contains four servers.

The servers are configured as shown in the following table.

You need to deploy IP Address Management (IPAM) to manage DNS and DHCP.

On which server should you install IPAM?

A.Server1

B.Server2

C.Server3

D.Server4

Answer: D

70-417 Latest questions and answers on Google Drive(100% Free Download): https://drive.google.com/file/d/0B_3QX8HGRR1mZG5scHZoTmhYWGs/view?usp=sharing

70-417 exam dumps (100% Pass Guaranteed) from CertBus: http://www.certgod.com/ [100% Exam Pass Guaranteed]

Why select/choose CertBus?

Millions of interested professionals can touch the destination of success in exams by certgod.com. products which would be available, affordable, updated and of really best quality to overcome the difficulties of any course outlines. Questions and Answers material is updated in highly outclass manner on regular basis and material is released periodically and is available in testing centers with whom we are maintaining our relationship to get latest material.

Brand	Certbus	Testking	Pass4sure	Actualtests	Others
Price	$45.99	$124.99	$125.99	$189	$69.99-99.99
Up-to-Date Dumps
Free 365 Days Update
Real Questions
Printable PDF
Test Engine
One Time Purchase
Instant Download
Unlimited Install
100% Pass Guarantee
100% Money Back
Secure Payment
Privacy Protection