Free Sharing CertBus Updated Cisco 300-115 VCE and PDF Exam Practice Materials

CertBus 2019 Latest Cisco 300-115 CCDP Exam VCE and PDF Dumps for Free Download!

☆ 300-115 CCDP Exam PDF and VCE Dumps : 1064QAs Instant Download: https://www.certgod.com/300-115.html [100% 300-115 Exam Pass Guaranteed or Money Refund!!]
☆ Free view online pdf on CertBus free test 300-115 PDF: https://www.certgod.com/online-pdf/300-115.pdf
☆ CertBus 2019 Latest 300-115 CCDP exam Question PDF Free Download from Google Drive Share: https://drive.google.com/file/d/0B_3QX8HGRR1mMEN0QmNidzVWMFk/view?usp=sharing

Following 300-115 1064QAs are all new published by Cisco Official Exam Center

You can prepare for your Cisco CCDP Newest 300-115 QAs exam with less time and effort because we,CertBus, will act as your reliable guide to pass your Cisco CCDP May 16,2019 Latest 300-115 vce dumps exam. Our Cisco CCDP Newest 300-115 free download exam dumps are the latest and with the most accurate answers. We offer Cisco CCDP Newest 300-115 free download PDF dumps and Cisco CCDP Latest 300-115 vce dumps VCE. Both are the most effective version.

CertBus latest 300-115 certification exam CertBus vce download. CertBus – 300-115 certification with money back assurance. latest 300-115 exam dumps. get your certification easily- CertBus. pass 300-115 certification exam with CertBus braindumps! CertBus – 300-115 certification with money back assurance. CertBus – help all candidates pass the 300-115 certification exams easily.

We CertBus has our own expert team. They selected and published the latest 300-115 preparation materials from Cisco Official Exam-Center: https://www.certgod.com/300-115.html

Question 1:

The network manager has requested that several new VLANs (VLAN 10, 20, and 30) are allowed to traverse the switch trunk interface. After the command switchport trunk allowed vlan 10,20,30 is issued, all other existing VLANs no longer pass traffic over the trunk. What is the root cause of the problem?

A. The command effectively removed all other working VLANs and replaced them with the new VLANs.

B. VTP pruning removed all unused VLANs.

C. ISL was unable to encapsulate more than the already permitted VLANs across the trunk.

D. Allowing additional VLANs across the trunk introduced a loop in the network.

Correct Answer: A

Explanation: The “switchport trunk allowed vlan” command will only allow the specified VLANs, and overwrite any others that were previously defined. You would also need to explicitly allow the other working VLANs to this configuration command, or use the “issue the switchport trunk allowed vlan add vlan-list” command instead to add these 3 VLANS to the other defined allowed VLANs. Reference: https:// supportforums.cisco.com/document/11836/how-define-vlansallowed-trunk- link

Question 2:

Which statement about the UDLD protocol is true?

A. UDLD is a Cisco-proprietary Layer 2 protocol that enables devices to monitor the physical status of links and detect unidirectional failures.

B. UDLD is a Cisco-proprietary Layer 2 protocol that enables devices to advertise their identity, capabilities, and neighbors on a local area network.

C. UDLD is a standardized Layer 2 protocol that enables devices to monitor the physical status of links and detect unidirectional failures.

D. UDLD is a standardized Layer 2 protocol that enables devices to advertise their identity, capabilities, and neighbors on a local area network.

Correct Answer: A

The Cisco-proprietary UDLD protocol monitors the physical configuration of the links between devices and ports that support UDLD. UDLD detects the existence of

unidirectional links. When a unidirectional link is detected, UDLD puts the affected port into the errdisabled state and alerts the user.

Reference:

http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SX/configuration/guide/udl d.html

Question 3:

Refer to the exhibit.

The users in an engineering department that connect to the same access switch cannot access the network. The network engineer found that the engineering VLAN is missing from the database. Which action resolves this problem?

A. Disable VTP pruning and disable 802.1q.

B. Update the VTP revision number.

C. Change VTP mode to server and enable 802.1q.

D. Enable VTP pruning and disable 802.1q.

Correct Answer: C

Only VTP servers can add new VLANs to the switched network, so to enable vlan 10 on this switch you will first need to change the VTP mode from client to server. Then, you will need to enable 802.1Q trunking to pass this new VLAN along to the other switches.

Question 4:

Which statement about the use of PAgP link aggregation on a Cisco switch that is running Cisco IOS Software is true?

A. PAgP modes are off, auto, desirable, and on. Only the combinations auto-desirable, desirable- desirable, and on-on allow the formation of a channel.

B. PAgP modes are active, desirable, and on. Only the combinations active-desirable, desirable- desirable, and on-on allow the formation of a channel.

C. PAgP modes are active, desirable, and on. Only the combinations active-active, desirable- desirable, and on-on allow the formation of a channel.

D. PAgP modes are off, active, desirable, and on. Only the combinations auto-auto, desirable- desirable, and on-on allow the formation of a channel.

Correct Answer: A

PAgP modes are off, auto, desirable, and on. Only the combinations auto-desirable, desirable- desirable, and on-on will allow a channel to be formed.

The PAgP modes are explained below.

1.on: PAgP will not run. The channel is forced to come up. 2.off: PAgP will not run. The channel is forced to remain down. 3.auto: PAgP is running passively. The formation of a channel is desired; however, it is not initiated. 4.desirable: PAgP

is running actively. The formation of a channel is desired and ini- tiated. Only the combinations of auto-desirable, desirable-desirable, and on-on will allow a channel to be formed. If a device on one side of the channel does not support PAgP,

such as a router, the device on the other side must have PAgP set to on.

https://www.CertBus.com/300-115.html

Reference: http://www.cisco.com/c/en/us/support/docs/switches/catalyst-2900-xl-series- switches/21041- 131.html

Question 5:

Refer to the exhibit.

Users of PC-1 experience slow connection when a webpage is requested from the server. To increase bandwidth, the network engineer configured an EtherChannel on interfaces Fa1/0 and Fa0/1 of the server farm switch, as shown here:

Server_Switch#sh etherchannel load-balance

EtherChannel Load-Balancing Operational State (src-mac):

Non-IP: Source MAC address

IPv4: Source MAC address

IPv6: Source IP address

Server_Switch#

However, traffic is still slow. Which action can the engineer take to resolve this issue?

A. Disable EtherChannel load balancing.

B. Upgrade the switch IOS to IP services image.

C. Change the load-balance method to dst-mac.

D. Contact Cisco TAC to report a bug on the switch.

Correct Answer: C

Since this traffic is coming from PC-1, the source MAC address will always be that of PC-1, and since the load balancing method is source MAC, traffic will only be using one of the port channel links. The load balancing method should be changed to destination MAC, since the web server has two NICs traffic will be load balanced across both MAC addresses. https://www.CertBus.com/300-115.html

Latest 300-115 Dumps300-115 VCE Dumps300-115 Practice Test

Question 6:

When two MST instances (MST 1 and MST 2) are created on a switch, what is the total number of spanning-tree instances running on the switch?

A. 1

B. 2

C. 3

D. 4

Correct Answer: C

Unlike other spanning tree protocols, in which all the spanning tree instances are independent, MST establishes and maintains IST, CIST, and CST spanning trees:

An IST is the spanning tree that runs in an MST region.

Within each MST region, MST maintains multiple spanning tree instances. Instance 0 is a special instance for a region, known as the IST. All other MST instances are numbered from 1 to 4094. In the case for this question, there will be the 2

defined MST instances, and the special 0 instance, for a total of 3 instances. The IST is the only spanning tree instance that sends and receives BPDUs. All of the other span- ning tree instance information is contained in MSTP records (M-

records), which are encapsu- lated within MST BPDUs. Because the MST BPDU carries information for all instances, the number of BPDUs that need to be processed to support multiple spanning tree instances is signifi- cantly reduced. All

MST instances within the same region share the same protocol timers, but each MST in- stance has its own topology parameters, such as root bridge ID, root path cost, and so forth. By default, all VLANs are assigned to the IST. An MST

instance is local to the region; for example, MST instance 1 in region A is independent of MST instance 1 in region B, even if regions A and B are interconnected.

A CIST is a collection of the ISTs in each MST region.

The CST interconnects the MST regions and single spanning trees.

Reference: http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst6500/ios/12- 2SX/configuration/ guide/book/spantree.html

Question 7:

The command storm-control broadcast level 75 65 is configured under the switch port connected to the corporate mail server. In which three ways does this command impact the traffic? (Choose three.)

A. SNMP traps are sent by default when broadcast traffic reaches 65% of the lower-level threshold.

B. The switchport is disabled when unicast traffic reaches 75% of the total interface bandwidth.

C. The switch resumes forwarding broadcasts when they are below 65% of bandwidth.

D. Only broadcast traffic is limited by this particular storm control configuration.

E. Multicast traffic is dropped at 65% and broadcast traffic is dropped at 75% of the total interface bandwidth.

F. The switch drops broadcasts when they reach 75% of bandwidth.

Correct Answer: CDF

storm-control {broad- Configure broadcast, multicast, or unicast storm control. By de- cast | multicast | uni- fault, storm control is disabled.

cast} level {level [lev-

The keywords have these meanings:

el-low] | pps pps [pps-low]}

For level, specify the rising threshold level for broadcast, multicast, or unicast traffic as a percentage (up to two decimal places) of the bandwidth. The port blocks traffic when the rising threshold is reached. The range is 0.00 to 100.00.

(Optional) For level-low, specify the falling threshold level as a percentage (up to two decimal places) of the bandwidth. This value must be less than or equal to the rising suppression value. The port forwards traffic when traffic drops below

this level. If you do not configure a falling suppression level, it is set to the rising suppression level. The range is 0.00 to 100.00.

In this case, the broadcast keyword was used so only broadcast traffic is limited. Reference: http:// www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3550/ software/release/12- 2_25_see/configuration/ guide/3550SCG/swtrafc.html

Question 8:

Which type of information does the DHCP snooping binding database contain?

A. untrusted hosts with leased IP addresses

B. trusted hosts with leased IP addresses

C. untrusted hosts with available IP addresses

D. trusted hosts with available IP addresses

Correct Answer: A

DHCP snooping is a security feature that acts like a firewall between untrusted hosts and trusted DHCP servers. The DHCP snooping feature performs the following activities: Validates DHCP messages received from untrusted sources and filters out invalid messages.

Rate-limits DHCP traffic from trusted and untrusted sources. ?Builds and maintains the DHCP snooping binding database, which contains information about untrusted hosts with leased IP addresses.

Utilizes the DHCP snooping binding database to validate subsequent requests from untrusted hosts. Reference: http://www.cisco.com/c/en/us/td/docs/switches/ lan/catalyst6500/ios/12- 2SX/configuration/ guide/book/snoodhcp.pdf

Question 9:

On which interface can port security be configured?

A. static trunk ports

B. destination port for SPAN

C. EtherChannel port group

D. dynamic access point

Correct Answer: A

Port Security and Port Types

You can configure port security only on Layer 2 interfaces. Details about port security and different types of interfaces or ports are as follows:

Access ports–You can configure port security on interfaces that you have configured as Layer 2 access ports. On an access port, port security applies only to the access VLAN. Trunk ports–You can configure port security on interfaces that

you have configured as Layer 2 trunk ports. VLAN maximums are not useful for access ports. The device allows VLAN maximums only for VLANs associated with the trunk port.

SPAN ports–You can configure port security on SPAN source ports but not on SPAN destination ports.

Ethernet Port Channels–Port security is not supported on Ethernet port channels. Reference: http:// www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/4_1/ nx- os/security/configuration/guide/sec_nx- os-cfg/sec_portsec.html

Question 10:

What is the default amount by which the hot standby priority for the router is decremented or incremented when the interface goes down or comes back up?

A. 1

B. 5

C. 10

D. 15

Correct Answer: C

The standby track interface configuration command ties the router hot standby priority to the availability of its interfaces and is useful for tracking interfaces that are not configured for HSRP. When a tracked interface fails, the hot standby priority on the device on which tracking has been configured decreases by

10. If an interface is not tracked, its state changes do not affect the hot standby priority of the configured device. For each interface configured for hot standby, you can configure a separate list of interfaces to be tracked. Reference: http:// www.cisco.com/en/US/docs/switches/lan/catalyst3550/software/ release/12.1_19_ea1/ confi guration/guide/swhsrp.html

CertBus exam braindumps are pass guaranteed. We guarantee your pass for the 300-115 exam successfully with our Cisco materials. CertBus Implementing Cisco IP Switched Networks exam PDF and VCE are the latest and most accurate. We have the best Cisco in our team to make sure CertBus Implementing Cisco IP Switched Networks exam questions and answers are the most valid. CertBus exam Implementing Cisco IP Switched Networks exam dumps will help you to be the Cisco specialist, clear your 300-115 exam and get the final success.

300-115 Latest questions and answers on Google Drive(100% Free Download): https://drive.google.com/file/d/0B_3QX8HGRR1mMEN0QmNidzVWMFk/view?usp=sharing

300-115 Cisco exam dumps (100% Pass Guaranteed) from CertBus: https://www.certgod.com/300-115.html [100% Exam Pass Guaranteed]

Why select/choose CertBus?

Millions of interested professionals can touch the destination of success in exams by certgod.com. products which would be available, affordable, updated and of really best quality to overcome the difficulties of any course outlines. Questions and Answers material is updated in highly outclass manner on regular basis and material is released periodically and is available in testing centers with whom we are maintaining our relationship to get latest material.

Brand	Certbus	Testking	Pass4sure	Actualtests	Others
Price	$45.99	$124.99	$125.99	$189	$69.99-99.99
Up-to-Date Dumps
Free 365 Days Update
Real Questions
Printable PDF
Test Engine
One Time Purchase
Instant Download
Unlimited Install
100% Pass Guarantee
100% Money Back
Secure Payment
Privacy Protection