[Newest Version] Easily Pass 300-360 Exam with CertBus Updated Real Cisco 300-360 Exam Materials

CertBus 2019 Hottest Cisco 300-360 CCNP Wireless Exam VCE and PDF Dumps for Free Download!

☆ 300-360 CCNP Wireless Exam PDF and VCE Dumps : 189QAs Instant Download: https://www.certgod.com/300-360.html [100% 300-360 Exam Pass Guaranteed or Money Refund!!]
☆ Free view online pdf on CertBus free test 300-360 PDF: https://www.certgod.com/online-pdf/300-360.pdf

Following 300-360 189QAs are all new published by Cisco Official Exam Center

The CCNP Wireless May 24,2019 Hotest 300-360 pdf Designing Cisco Wireless Enterprise Networks certification exam is a real worth challenging task if you want to win a place in the IT industry. You should not feel frustrated about the confronting difficulties. CertBus gives you the most comprehensive version of Hotest 300-360 free download Designing Cisco Wireless Enterprise Networks VCE dumps now. Get a complete hold on CCNP Wireless CCNP Wireless Newest 300-360 study guide Designing Cisco Wireless Enterprise Networks exam syllabus through CertBus and boost up your skills. What’s more, the CCNP Wireless Newest 300-360 pdf dumps are the latest. It would be great helpful to your CCNP Wireless Latest 300-360 vce exam.

real 300-360 questions and actual answers – guaranteed pass results! CertBus the most professional it certification exam preparation guide. help you to pass all your 300-360 certification easily. CertBus – help all candidates pass the 300-360 certification exams easily. CertBus 100% accurate exam brain dumps with latest update. download the free 300-360 demo to check first.

We CertBus has our own expert team. They selected and published the latest 300-360 preparation materials from Cisco Official Exam-Center: https://www.certgod.com/300-360.html

Question 1:

Which three things do you need to consider prior to performing a wireless site survey? (Choose three.)

A. The time required to acquire any additional infrastructure components.

B. The time required to survey each potential AP location.

C. The time required to assess application server locations at the customer facility.

D. The type of wireless survey tools required to perform the site survey.

E. The time required to assess customer WLAN density and throughput requirements.

F. The time required to utilize the design mode in Cisco WCS to prepare a preliminary WLAN design to reduce on-site survey time.

Correct Answer: BDE

Question 2:

Which three options are benefits of U-APSD? (Choose three.)

A. optimized power-save mode periods

B. increased call capacity

C. bandwidth reservation

D. synchronization of the transmission and reception of voice frames

E. efficient roaming

F. priority bandwidth and polling

Correct Answer: ABD

Unscheduled automatic power-save delivery (U-APSD) is a feature that has two key benefits: The primary benefit of U-APSD is that it allows the voice client to synchronize the transmission and reception of voice frames with the AP, thereby allowing the client to go into power-save mode between the transmission/reception of each voice frame tuple. The WLAN client frame transmission in the access categories supporting U-APSD triggers the AP to send any data frames queued for that WLAN client in that AC. A U-APSD client remains listening to the AP until it receives a frame from the AP with an end-of-service period (EOSP) bit set. This tells the client that it can now go back into its power-save mode. This triggering mechanism is considered a more efficient use of client power than the regular listening for beacons method, at a period controlled by the delivery traffic indication map (DTIM) interval, because the latency and jitter requirements of voice are such that a WVoIP client would either not be in power-save mode during a call, resulting in reduced talk times, or would use a short DTIM interval, resulting in reduced standby times. The use of U-APSD allows the use of long DTIM intervals to maximize standby time without sacrificing call quality. The U-APSD feature can be applied individually across access categories, allowing U-APSD can be applied to the voice ACs in the AP, but the other ACs still use the standard power save feature. The secondary benefit of this feature is increased call capacity. The coupling of transmission buffered data frames from the AP with the triggering data frame from the WLAN client allows the frames from the AP to be sent without the accompanying interframe spacing and random backoff, thereby reducing the contention experience by call. http://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/Mobility/vowlan/41dg/vowlan41dg-book/vowlan_ch2.html#wp1045982

Question 3:

An engineer is assigned to provide wireless coverage in a provincial capital building. Due to the age and historic nature of the building, the ability to run new copper Ethernet cable to desired AP locations is limited. Which requirement should the engineer specify to overcome this restriction?

A. Deploy access points where the survey indicates and connect them via fiber optic cable, using a mediaadapter, and locally provide power.

B. Deploy access points to each phone location converting two spare pairs of copper from the phone line toEthernet and locally provide power.

C. Deploy access point devices where limited cable can be run or exists and connect high-gain antennas andincrease Tx power to increase cell size.

D. Deploy RAP where limited cable can be run or exists, and extend coverage using MAP.

Correct Answer: D

Question 4:

Cisco 7925G phones are experiencing intermittent connectivity issues. The wireless survey reveals that the facility has no current coverage holes. The radios on the 2.4GHz channel have all been statically set to power level 1. Which two reasons could explain why the phones are having issues on this wireless network? (Choose two.)

A. The phones are experiencing excessive co-channel interference.

B. The phones only operate on the 2.4 GHz band when the power level is above 25 mW.

C. The phones are not transmitting at the same power levels as the access points.

D. The phones are experiencing delays of less than 30 ms within their coverage cell.

E. The phones are receiving greater than -67 dBm RSSI on the 2.4 GHz band.

Correct Answer: AC

Question 5:

Which two options describe best practices that must be completed after a wireless installation is finished? (Choose two.)

A. Make sure that there are no spaces between the devices on the rack that the Wireless Lan Controller isinstalled.

B. Consult with the customer to ensure that the IT staff has a complete set of design and installationdocuments.

C. Make sure the customer is aware that they should consider purchasing a support contract immediately afterthe installation is complete.

D. Spend time with the customer to show them the controller GUI and inform them how they can reach theCisco TAC if they have any problems.

E. Test all the customer\’s wireless devices and applications to ensure they are working properly.

Correct Answer: BE

Latest 300-360 Dumps300-360 VCE Dumps300-360 Study Guide

Question 6:

A customer has dual-band devices that they want to use 40 MHz channels. If the customer is using Cisco 3600 Series access points with a 5508 controller. Which setting assists with this change?

A. Enable band select globally.

B. Enable aggressive load balancing.

C. Disable lower data rates on 802 .11G GHz radios.

D. Disable overlapping 802.11G channels.

Correct Answer: A

Question 7:

When designing and deploying an outdoor mesh network, what is the appropriate RF cell overlap?

A. 10 percent

B. 15 percent

C. 20 percent

D. 25 percent

E. Application dependent

Correct Answer: E

Question 8:

Refer to the exhibit. Which type of cable connector is displayed that is used to connect antennas to transmitters?

A. RP-TNC

B. N

C. SMA

D. SMB

E. MMCX

Correct Answer: B

Question 9:

What protocol can be enabled to listen in on IPv4 multicast streams and maintain a map of what each client requests on a wireless LAN controller?

A. IGMP

B. MLD

C. PAP

D. ICMP

E. SIP

F. NTP

Correct Answer: A

Question 10:

A customer recently placed 10 WLCs in a mobility group and now sees a large amount of additional traffic to and from the controller. What setting should be changed to reduce the traffic?

A. Mobility Multicast Messaging

B. Mobility Unicast Messaging

C. Mobility Anchor Keep Alive Count

D. Mobility Anchor Keep Alive Interval

Correct Answer: A

CertBus exam braindumps are pass guaranteed. We guarantee your pass for the 300-360 exam successfully with our Cisco materials. CertBus Designing Cisco Wireless Enterprise Networks exam PDF and VCE are the latest and most accurate. We have the best Cisco in our team to make sure CertBus Designing Cisco Wireless Enterprise Networks exam questions and answers are the most valid. CertBus exam Designing Cisco Wireless Enterprise Networks exam dumps will help you to be the Cisco specialist, clear your 300-360 exam and get the final success.

300-360 Cisco exam dumps (100% Pass Guaranteed) from CertBus: https://www.certgod.com/300-360.html [100% Exam Pass Guaranteed]

Why select/choose CertBus?

Millions of interested professionals can touch the destination of success in exams by certgod.com. products which would be available, affordable, updated and of really best quality to overcome the difficulties of any course outlines. Questions and Answers material is updated in highly outclass manner on regular basis and material is released periodically and is available in testing centers with whom we are maintaining our relationship to get latest material.

Brand	Certbus	Testking	Pass4sure	Actualtests	Others
Price	$45.99	$124.99	$125.99	$189	$69.99-99.99
Up-to-Date Dumps
Free 365 Days Update
Real Questions
Printable PDF
Test Engine
One Time Purchase
Instant Download
Unlimited Install
100% Pass Guarantee
100% Money Back
Secure Payment
Privacy Protection