Pass Guarantee 400-101 Exam By Taking CertBus New Cisco 400-101 VCE And PDF Braindumps
CertBus 2017 Valid Cisco 400-101 CCIE Exam VCE and PDF Dumps for Free Download!
☆ 400-101 CCIE Exam PDF and VCE Dumps : 828QAs Instant Download: https://www.certgod.com/400-101.html [100% 400-101 Exam Pass Guaranteed or Money Refund!!]
☆ Free view online pdf on CertBus free test 400-101 PDF: https://www.certgod.com/online-pdf/400-101.pdf
☆ CertBus 2017 Valid 400-101 CCIE exam Question PDF Free Download from Google Drive Share: https://drive.google.com/file/d/0B_3QX8HGRR1mdEpkTFZvSDJDc2c/view?usp=sharing
Following 400-101 828QAs are all new published by Cisco Official Exam Center
There is no need to worry about the difficulties on the CCIE Hotest 400-101 pdf dumps exam preparation. CertBus will assist you pass your CCIE Latest 400-101 practice exam with up to date Hotest 400-101 QAs CCIE Routing and Switching Written v5.0 PDF and VCE dumps. CertBus provides the most update real CCIE Sep 29,2017 Latest 400-101 study guide exam preparation material, covering each and every aspect which real CCIE Newest 400-101 QAs exam requires. We ensure you 100% success in CCIE Hotest 400-101 study guide exam.
CertBus – most reliable and professional 400-101 certification exam material provider. real latest, easily pass. CertBus it exam study material and real exam questions and answers help you pass 400-101 exams and get 400-101 certifications easily. CertBus – our goal is to help all candidates pass their 400-101 exams and get their certifications in their first attempt. money back guarantee.
We CertBus has our own expert team. They selected and published the latest 400-101 preparation materials from Cisco Official Exam-Center: https://www.certgod.com/400-101.html
QUESTION NO:1
Which two commands are required to enable multicast on a router, knowing that the receivers only
support IGMPv2? (Choose two.)
A. ip pim rp-address
B. ip pim ssm
C. ip pim sparse-mode
D. ip pim passive
Answer: A,C
Explanation:
Sparse mode logic (pull mode) is the opposite of Dense mode logic (push mode), in Dense mode
it is supposed that in every network there is someone who is requesting the multicast traffic so
PIM-DM routers begin by flooding the multicast traffic out of all their interfaces except those from
where a prune message is received to eliminate the
QUESTION NO:4
Refer to the exhibit.
R1 has an EBGP session to ISP 1 and an EBGP session to ISP 2. R1 receives the same prefixes
through both links.
Which configuration should be applied so that the link between R1 and ISP 2 will be preferred for
outgoing traffic (R1 to ISP 2)?
A. Increase local preference on R1 for received routes
B. Decrease local preference on R1 for received routes
C. Increase MED on ISP 2 for received routes
D. Decrease MED on ISP 2 for received routes
Answer: A
Explanation: Explanation
Local preference is an indication to the AS about which path has preference to exit the AS in order
to reach a certain network. A path with higher local preference is preferred more. The default value
of preference is 100.
Reference
http://www.cisco.com/en/US/tech/tk872/technologies_configuration_example09186a0080b82d1f.s
html?
referring_site=smartnavRD
QUESTION NO:14
Which three options are features of VTP version 3? (Choose three.)
A. VTPv3 supports 8K VLANs.
B. VTPv3 supports private VLAN mapping.
C. VTPv3 allows for domain discovery.
D. VTPv3 uses a primary server concept to avoid configuration revision issues.
E. VTPv3 is not compatible with VTPv1 or VTPv2.
F. VTPv3 has a hidden password option.
Answer: B,D,F
Explanation:
Key Benefits of VTP Version 3
Much work has gone into improving the usability of VTP version 3 in three major areas:
The new version of VTP offers better administrative control over which device is allowed to update
other devices’ view of the VLAN topology. The chance of unintended and disruptive changes is
significantly reduced, and availability is increased. The reduced risk of unintended changes will
ease the change process and help speed deployment.
Functionality for the VLAN environment has been significantly expanded. Two enhancements are
most beneficial for today’s networks:
QUESTION NO:16
In 802.1s, how is the VLAN to instance mapping represented in the BPDU?
A. The VLAN to instance mapping is a normal 16-byte field in the MST BPDU.
B. The VLAN to instance mapping is a normal 12-byte field in the MST BPDU.
C. The VLAN to instance mapping is a 16-byte MD5 signature field in the MST BPDU.
D. The VLAN to instance mapping is a 12-byte MD5 signature field in the MST BPDU.
Answer: C
Explanation:
MST Configuration and MST Region
Each switch running MST in the network has a single MST configuration that consists of these
three attributes:
1. An alphanumeric configuration name (32 bytes)
2. A configuration revision number (two bytes)
3. A 4096-element table that associates each of the potential 4096 VLANs supported on the
chassis to a given instance.
In order to be part of a common MST region, a group of switches must share the same
configuration attributes.
It is up to the network administrator to properly propagate the configuration throughout the region.
Currently, this step is only possible by the means of the command line interface (CLI) or through
Simple Network
Management Protocol (SNMP). Other methods can be envisioned, as the IEEE specification does
not explicitly mention how to accomplish that step.
Note: If for any reason two switches differ on one or more configuration attribute, the switches are
part of different regions. For more information refer to the Region Boundary section of this
document.
Region Boundary
In order to ensure consistent VLAN-to-instance mapping, it is necessary for the protocol to be able
to exactly identify the boundaries of the regions. For that purpose, the characteristics of the region
are included in the BPDUs. The exact VLANs-to-instance mapping is not propagated in the BPDU,
because the switches only need to know whether they are in the same region as a neighbor.
Therefore, only a digest of the VLANs-toinstance mapping table is sent, along with the revision
number and the name. Once a switch receives a BPDU, the switch extracts the digest (a
numerical value derived from the VLAN-to-instance mapping table through a mathematical
function) and compares this digest with its own computed digest. If the digests differ, the port on
which the BPDU was received is at the boundary of a region.
In generic terms, a port is at the boundary of a region if the designated bridge on its segment is in
a different region or if it receives legacy 802.1d BPDUs. In this diagram, the port on B1 is at the
boundary of region A, whereas the ports on B2 and B3 are internal to region B:
MST Instances
According to the IEEE 802.1s specification, an MST bridge must be able to handle at least these
two instances:
One Internal Spanning Tree (IST)
One or more Multiple Spanning Tree Instance(s) (MSTIs)
The terminology continues to evolve, as 802.1s is actually in a pre-standard phase. It is likely
these names will change in the final release of 802.1s. The Cisco implementation supports 16
instances: one IST (instance 0) and 15 MSTIs.
show vtp status
Cisco switches “show vtp status” Field Descriptions has a MD5 digest field that is a 16-byte
checksum of the
VTP configuration as shown below
Router# show vtp status
VTP Version: 3 (capable)
Configuration Revision: 1
Maximum VLANs supported locally: 1005
Number of existing VLANs: 37
VTP Operating Mode: Server
VTP Domain Name: [smartports]
VTP Pruning Mode: Disabled
VTP V2 Mode: Enabled
VTP Traps Generation: Disabled
MD5 digest : 0x26 0xEE 0x0D 0x84 0x73 0x0E 0x1B 0x69
Configuration last modified by 172.20.52.19 at 7-25-08 14:33:43
Local updater ID is 172.20.52.19 on interface Gi5/2 (first layer3 interface fou)
VTP version running: 2
Reference
http://www.cisco.com/en/US/tech/tk389/tk621/technologies_white_paper09186a0080094cfc.shtml
http://www.cisco.com/en/US/docs/ios-xml/ios/lanswitch/command/lsw-cr-book.pdf
QUESTION NO:17
Which three combinations are valid LACP configurations that will set up a channel? (Choose
three.)
A. On/On
B. On/Auto
C. Passive/Active
D. Desirable/Auto
E. Active/Active
F. Desirable/Desirable
Answer: A,C,E
Explanation:
Latest 400-101 Dumps400-101 PDF Dumps400-101 Exam Questions
QUESTION NO:21
Refer to the exhibit.
A packet from RTD with destination RTG, is reaching RTB. What is the path this packet will take
from RTB to reach RTG?
A. RTB – RTA – RTG
B. RTB – RTD – RTC – RTA – RTG
C. RTB – RTF – RTE – RTA – RTG
D. RTB will not be able to reach RTG since the OSPF configuration is wrong.
Answer: C
Explanation:
QUESTION NO:24
Refer to the exhibit.
R1 is not learning about the 172.16.10.0 subnet from the BGP neighbor R2 (209.165.202.130).
What can be done so that R1 will learn about this network?
A. Disable auto-summary on R2.
B. Configure an explicit network command for the 172.16.10.0 subnet on R2.
C. Subnet information cannot be passed between IBGP peers.
D. Disable auto-summary on R1.
Answer: B
Explanation:
By default, BGP does not accept subnets redistributed from IGP. To advertise and carry subnet
routes in BGP, use an explicit network command or the no auto-summary command. If you disable
auto-summarization and have not entered a network command, you will not advertise network
routes for networks with subnet routes unless they contain a summary route.
Reference
http://www.cisco.com/en/US/docs/ios/11_3/np1/command/reference/1rbgp.html
QUESTION NO:37
Which command can be used on a PE router to connect to a CE router (11.1.1.4) in VRF red?
A. telnet 11.1.1.4 /vrf-source red
B. telnet 11.1.1.4 source /vrf red
C. telnet 11.1.1.4 /source vrf red
D. telnet 11.1.1.4 /vrf red
E. telnet 11.1.1.4 vrf red
Answer: D
Explanation:
Telnetting can be done through the VRF using the Management Ethernet interface. In the
following example, the router telnets to 172.17.1.1 through the Management Ethernet interface
VRF:
Router# telnet 172.17.1.1 /vrf Mgmt-intf
Reference
http://www.cisco.com/en/US/docs/routers/asr1000/configuration/guide/chassis/Management_Ether
net.html
QUESTION NO:38
Refer to the exhibit.
This is an MPLS VPN network with OSPF as the PE-CE routing protocol. Which statement is
correct?
A. The routing inside the VPN RED will never work correctly.
B. The routing inside the VPN RED can be enabled by configuring virtual links between the PE
routers.
C. The routing inside the VPN RED can be enabled by configuring area 0 inside the VRF on the
PE routers.
D. The routing inside the VPN RED will work without any special OSPF configuration.
E. The routing inside the VPN RED will work if the PE routers have a full mesh of sham-links
configured for VRF RED.
Answer: D Explanation:
http://www.cisco.com/en/US/docs/net_mgmt/vpn_solutions_center/1.1/user/guide/VPN_UG1.html
QUESTION NO:41
On a router, interface S0 is running EIGRPv6, and interface S1 is running OSPFv3. A
redistribution command is issued under OSPFv3, redistribute EIGRP 1 metric 20 under ipv6 router
ospf 1. What will happen after applying this redistribution command?
A. All routes showing up as D and D EX in the routing table will be redistributed into OSPFv3.
B. All routes showing up as D, D EX, and C in the routing table will be redistributed into OSPFv3.
C. All routes showing up as D and D EX in the routing table and the S0 interface will be
redistributed into OSPFv3.
D. All routes showing up as D in the routing table will be redistributed into OSPFv3.
E. All routes showing up as D EX in the routing table will be redistributed into OSPFv3.
Answer: A
Explanation:
D are EIGRP Internal Routes and D EX are EIGRP external routes. Both Internal and External
EIGRP routes will be redistributed with the configuration shown above
CertBus exam braindumps are pass guaranteed. We guarantee your pass for the 400-101 exam successfully with our Cisco materials. CertBus CCIE Routing and Switching Written v5.0 exam PDF and VCE are the latest and most accurate. We have the best Cisco in our team to make sure CertBus CCIE Routing and Switching Written v5.0 exam questions and answers are the most valid. CertBus exam CCIE Routing and Switching Written v5.0 exam dumps will help you to be the Cisco specialist, clear your 400-101 exam and get the final success.
400-101 Latest questions and answers on Google Drive(100% Free Download): https://drive.google.com/file/d/0B_3QX8HGRR1mdEpkTFZvSDJDc2c/view?usp=sharing
400-101 Cisco exam dumps (100% Pass Guaranteed) from CertBus: https://www.certgod.com/400-101.html [100% Exam Pass Guaranteed]
Why select/choose CertBus?
Millions of interested professionals can touch the destination of success in exams by certgod.com. products which would be available, affordable, updated and of really best quality to overcome the difficulties of any course outlines. Questions and Answers material is updated in highly outclass manner on regular basis and material is released periodically and is available in testing centers with whom we are maintaining our relationship to get latest material.