Do not worry about that if you are stuck in the HP2-Q01 exam difficulties, CertBus will assist you all your way through the HP2-Q01 Servicing HP Desktops, Workstations, and Notebooks exam with the most update HP2-Q01 PDF and VCE dumps. CertBus exam HP2-Q01 preparation materials are the most comprehensive material, covering every key knowledge of HP2-Q01 Servicing HP Desktops, Workstations, and Notebooks exam.
We CertBus has our own expert team. They selected and published the latest HP2-Q01 preparation materials from HP Official Exam-Center: http://www.certgod.com/HP2-Q01.html
QUESTION NO: 7
Your customer is having problems after installing memory in their computer. What should they do?
A. DPS test
B. Event Viewer
C. Device Manager
D. Task Manager
Answer: A
QUESTION NO: 8
What is the primary benefit of HP 3D DriveGuard?
A. it protects hard drive from moisture damage
B. it detects sudden motion and temporarily stops hard disk
C. it encrypts the hard disk drive data
D. it enhances Windows Aero security performance
Answer: B
Explanation:
HP DriveGuard and HP 3D DriveGuard – Formerly known as HP Mobile Data Protection, this
technology helps prevent hard disk drive failure and loss of data if the notebook is dropped or
moved while running
QUESTION NO: 5
Where would you confirm a spare part number?
A. HP PartSurfer
B. device manager
C. HP parts library
D. Windows Control Panel
Answer: A
QUESTION NO: 6
What tool do you use to test ESD equipment?
A. volt meter
B. osciloscope
C. ohm meter
D. amp meter
Answer: C
Explanation:
Electrostatic discharge protection
A sudden discharge of static electricity from your hand or another conductor can destroy static-
sensitive devices or micro circuitry. You might not feel or hear the spark, but it can cause damage.
An electronic device exposed to electrostatic discharge (ESD) may not be affected at all, or the
device may function normally for a while, and then degrade in the internal layers, reducing its life
expectancy. Networks built into many integrated circuits provide some protection, but in many
3
cases, the discharge contains enough power to alter device parameters or melt silicon junctions.
You should regularly check your ESD equipment using an ohmmeter.
QUESTION NO: 3
Your customer indicates that Windows in not recognizing their MultiBay hard disk drive. What can
be done first to isolate this problem?
A. Set the MultiBay hard disk drive as a slave
B. Reinstal the factory image
C. MultiBay is not an HP supported configuration
D. Reseat the MultiBay hard disk drive
Answer: D
Explanation:
The system does not recognize a hard drive in the external MultiBay. The drive is not seated
properly. Remove and reinsert the drive. The drive was inserted while the notebook was on, in
Standby, or Hibernation.
Always shut down the notebook before removing or inserting a hard drive. The drive is damaged.
Replace the hard drive.
2
QUESTION NO: 10
Your customer is experiencing intermittent lockups on a computer kept inside. What is most likely
cause?
A. vibration
B. temperature
C. ESD
D. altitude
Answer: B
QUESTION NO: 1
You upgrade the BIOS to the current version. Customers logs in and discover that a specific
software application does not work.
A. Downgrade the BIOS to the previous version
B. Contact HP for a replacement system board
C. Contact HP for a replace BIOS chip
D. Upgrade the affected software application
Answer: A
QUESTION NO: 4
What can you do with a MultiBay hard disk drive?
A. Increase the size of the existing hard disk drive
B. Attach a SCSI drive
C. Install an additional hard disk drive
D. Daisy chain multiple hard disk drives
Answer: C
QUESTION NO: 2
Your customer’s computer reboots with no warning. What should you try first to help isolate this?
(Select two)
A. Replace the system board and test
B. Remove any third party hardware
C. Check system event log
D. Restore the unit and reinstall
Answer: B,C
QUESTION NO: 9
The operating system doesn’t load. What is the first step you should take to determine if a third-
party component is related to the problem?
A. Replace the third party component
B. Remove the third party component
C. Call the third party vendor’s support line
D. Update the component drivers/software
Answer: B
4
CertBus exam braindumps are pass guaranteed. We guarantee your pass for the HP2-Q01 exam successfully with our HP materials. CertBus Servicing HP Desktops, Workstations, and Notebooks exam PDF and VCE are the latest and most accurate. We have the best HP in our team to make sure CertBus Servicing HP Desktops, Workstations, and Notebooks exam questions and answers are the most valid. CertBus exam Servicing HP Desktops, Workstations, and Notebooks exam dumps will help you to be the HP specialist, clear your HP2-Q01 exam and get the final success.
HP2-Q01 Latest questions and answers on Google Drive(100% Free Download): https://drive.google.com/file/d/0B_3QX8HGRR1mSE83NmtuS3c3TzQ/view?usp=sharing
HP2-Q01 HP exam dumps (100% Pass Guaranteed) from CertBus: http://www.certgod.com/HP2-Q01.html [100% Exam Pass Guaranteed]
Why select/choose CertBus?
Millions of interested professionals can touch the destination of success in exams by certgod.com. products which would be available, affordable, updated and of really best quality to overcome the difficulties of any course outlines. Questions and Answers material is updated in highly outclass manner on regular basis and material is released periodically and is available in testing centers with whom we are maintaining our relationship to get latest material.