Free Providing CertBus HP HP0-Y37 VCE Exam Study Guides With New Update Exam Questions

CertBus provides the most up to date and accurate preparing materials of the Master ASE HP0-Y37 certification exam Q and A , testing software, exam PDF and VCE files to help you prepare your Master ASE HP0-Y37 Migrating and Troubleshooting Enterprise Networks exam. What training you are looking for? Come to visit our site and choose CertBus online certification materials, you will get a quick and cost-efficient way to become a HP Master ASE certified professional in IT industry.

We CertBus has our own expert team. They selected and published the latest HP0-Y37 preparation materials from HP Official Exam-Center: http://www.certgod.com/HP0-Y37.html

QUESTION NO: 7

Click the Exhibit button.

A provider of MPLS services configures MPLS Layer-3 VPN services for two customers. Each customer

has three branch offices that will be interconnected by MPLS Layer-3 VPNs. The following are address

blocks chosen by the customers for each site as shown in the chart:

The provider uses OSPF as its IGP with the Loopback 0 addresses shown as the OSPF router-id and the

MPLS LSR-ID. Customer A uses a default route on each site. Customer B uses eBGP to exchange routes

with the provider. All MPLS layer-3 VPNs are functioning properly. Which configuration change will cause

Customer-A Site 1 to lose access to Customer-A Site 2?

A. [PE-1]

bgp 1

undo import-route static

B. [P-10]

ospf 1

area 0

abr-summary 16.0.0.2 30 cost 1000

C. [PE-1]

int vlan 100

undo mpls ldp

D. [PE-3]

bgp 1

undo peer 16.0.0.1 reflect-client

E. [P-10]

ip route static 10.1.0.0 16 null 0 preference 9

Correct Answer: B

QUESTION NO: 6

Which statements about BPDU Guard are correct? (Select three.)

A. It is a Cisco proprietary protocol that prevents other switches from sending BDPUs.

B. BPDU Guard filters the standard BDPUs received on the port.

C. BPDU Guard filters the PVST BDPUs received on the port.

D. BPDU Guard generates an alarm when a BPDU is received on the port and may block the port.

E. BPDU Guard is an open standard.

F. BPDU Guard is not a protocol. It must be applied locally and individually on switches.

Correct Answer: BDF

QUESTION NO: 2

A company’s LAN is composed of Cisco switches only. The network runs Rapid PVST with the short

pathcost method. Cisco distribution switches are set as root and secondary root in all VLANs. These two

switches connect over an Etherchannel. The company wants to install HP PoE switches at the edge of its

LAN. The customer wants to keep the load-balancing of traffic that is set in PVST . What are the possible

options? (Select three.)

A. ensure Spanning Tree is disabled on the HP edge switch, and configure loop-protection on edge ports

to avoid local loops

B. if the HP edge switch is an A-Series switch, configure Smart Link with load balancing between

instances

C. if the HP edge switch is an A-Series switch, configure Rapid PVST on it

D. configure MSTP on the HP edge switch, but set the cost of its uplink higher than that on the channel

between the distribution switches

E. configure MSTP on the HP edge switch and divide the VLANs into different instances

F. configure MSTP on the HP edge switch and set its uplink port cost to 5

G. configure MSTP on the HP edge switch, but set the cost of its uplink lower than that on the channel

between the distribution switches

Correct Answer: ABD

QUESTION NO: 1

You want to add HP edge switches to a company’s Cisco network. Distribution Cisco switches are set as

the Rapid PVST root and secondary root. You connect HP A-Series switches that are running their

factory default configuration to the two Cisco distribution switches. What will happen?

A. If you connect the edge switch with a redundant link to both distribution switches, you create a loop and

a broadcast storm on the Cisco network.

B. Cisco distribution switches send tagged PVST BPDUs to the HP switch. Because 802.1q is not yet

configured on HP switch uplinks, the PVST BPDUs are dropped. A loop occurs.

C. Cisco distribution switches send untagged standard BPDUs to the HP switch in VLAN 1, and in

response the HP switch blocks one of the uplinks on all VLANs, preventing a loop.

D. Cisco distribution switches send untagged standard BPDUs to HP switch in VLAN 1, which the HP

switch forwards to the other distribution

switch, preventing a loop. The HP switch drops all tagged data frames.

Correct Answer: D

QUESTION NO: 3

A provider of MPLS services configures MPLS Layer-3 VPN services for three customers. Each customer

has three branch offices that will be interconnected by MPLS Layer-3 VPNs. One customer is advertising

their IP prefixes between sites using BGP. This customer establishes a backup link directly connecting

Site-1 to Site-2. Which BGP attribute can the provider use to prevent routing update loops in the MPLS

network?

A. COO

B. FOO

C. KOO

D. SOO

E. VOO

Correct Answer: D

QUESTION NO: 4

Click the Exhibit button.

A provider of MPLS services configures MPLS Layer-3 VPN services for two customers. Each customer

has three branch offices that will be interconnected by MPLS Layer-3 VPNs. The address blocks chosen

by the customers for each site are shown in the following chart:

The provider uses OSPF as its IGP with the Loopback 0 addresses shown as the OSPF router-id and the

MPLS LSR-ID. A traceroute from Cust-A Site #1 to Cust-A Site #2 displays 5 intermediate routers. Which

statements are true? (Select three.)

A. MPLS label TTL expires on P-10.

B. TTL propagation is enabled on PE-1.

C. All but the first trace is processed by PE-2.

D. IP TTL expires on P-20.

E. PE-1 generates ICMP echo replies on behalf of P-10 and P-20.

F. TTL propagation is disabled on PE-1.

Correct Answer: ABC

QUESTION NO: 11

What is a characteristic of load balancing in RRPP?

A. multiple RRPP rings within a domain

B. overlapping RRPP rings

C. multiple RRPP domains with different root priorities

D. It is not possible to load balance with RRPP.

E. multiple RRPP domains sharing the same ring

Correct Answer: E

QUESTION NO: 5

Which statements are true about DHCP Snooping? (Select two.)

A. DHCP Snooping is a Cisco Proprietary protocol. The standard is not yet ratified.

B. DHCP Snooping prevents end nodes from receiving IP address assignments from an unauthorized

DHCP server.

C. DHCP Snooping is a malicious attack against the DHCP servers.

D. The DHCP Snooping binding table contains information about hosts interconnected with a trusted

interface.

E. DHCP Snooping is when a switch acts as a DHCP server for end nodes that connect to that particular

switch. This way, end nodes always get

an IP address.

F. When configuring DHCP Snooping on a switch, you define which ports are trusted to receive DHCP

offers. Typically uplinks of a switch are

trusted and Edge ports are untrusted.

Correct Answer: BF

QUESTION NO: 10

Click the Exhibit button.

You are replacing a Cisco BGP router with an HP A-Series BGP router. Examine the router’s

configurations. Which statements accurately describe the routers’ configurations? (Select three.)

A. Both configurations are identical in function.

B. The HP A-Series router will not implement the same BGP functions as the Cisco router.

C. Both BGP routers announce a static route to its BGP neighbor.

D. Both BGP routers announce network 215.34.10.0/22.

E. Neither BGP routers can announce a redistributed static route because no metrics are set.

F. The A-Series router’s prefix list is misconfigured.

Correct Answer: ACD

QUESTION NO: 8

Which statement is true about BGP Route Refresh? (Select two.)

A. Route Refresh is a feature for supported CPU functions with BGP routers that manage high number of

IP Prefixes.

B. Route Refresh is advertised as a BGP capability to BGP neighbors during BGP session establishment.

C. BGP Route Refresh eliminates the need for a Hard Reset of the BGP connection with a BGP neighbor

when route policies are changed.

D. With Route Refresh, a BGP router stores all BGP prefixes sent by a BGP neighbor.

E. With Route Refresh, a BGP Hard Reset is used to generate inbound updates from a neighbor or to

generate outbound updates to a neighbor.

Correct Answer: BC

CertBus exam braindumps are pass guaranteed. We guarantee your pass for the HP0-Y37 exam successfully with our HP materials. CertBus Migrating and Troubleshooting Enterprise Networks exam PDF and VCE are the latest and most accurate. We have the best HP in our team to make sure CertBus Migrating and Troubleshooting Enterprise Networks exam questions and answers are the most valid. CertBus exam Migrating and Troubleshooting Enterprise Networks exam dumps will help you to be the HP specialist, clear your HP0-Y37 exam and get the final success.

HP0-Y37 Latest questions and answers on Google Drive(100% Free Download): https://drive.google.com/file/d/0B_3QX8HGRR1mclQyeWdlblNPNW8/view?usp=sharing

HP0-Y37 HP exam dumps (100% Pass Guaranteed) from CertBus: http://www.certgod.com/HP0-Y37.html [100% Exam Pass Guaranteed]

Why select/choose CertBus?

Millions of interested professionals can touch the destination of success in exams by certgod.com. products which would be available, affordable, updated and of really best quality to overcome the difficulties of any course outlines. Questions and Answers material is updated in highly outclass manner on regular basis and material is released periodically and is available in testing centers with whom we are maintaining our relationship to get latest material.

Brand	Certbus	Testking	Pass4sure	Actualtests	Others
Price	$45.99	$124.99	$125.99	$189	$69.99-99.99
Up-to-Date Dumps
Free 365 Days Update
Real Questions
Printable PDF
Test Engine
One Time Purchase
Instant Download
Unlimited Install
100% Pass Guarantee
100% Money Back
Secure Payment
Privacy Protection