All4Certs Exam Archive Latest Update Free Version of Nortel 920-338 Exam Study Guides in CertBus

Latest Update Free Version of Nortel 920-338 Exam Study Guides in CertBus

Categories :

Attention please! Here is the shortcut to pass your 920-338 exam! Get yourself well prepared for the Nortel 920-338 BCM50 Rls.3.0 BCM200/400 Rls 4.0 and BCM450 Rls. 1.0 Instal Con exam is really a hard job. But don’t worry! We, CertBus, provides the most update exam PDF and VCEs. With CertBus latest exam questions and answerss, you’ll pass the 920-338 BCM50 Rls.3.0 BCM200/400 Rls 4.0 and BCM450 Rls. 1.0 Instal Con exam in an easy way.

We CertBus has our own expert team. They selected and published the latest 920-338 preparation materials from Nortel Official Exam-Center: http://www.certgod.com/920-338.html

QUESTION NO:151

An administrator started the journaling for library LIBA using the command STRJRNLIB with all parameters set to the IBM default. The administrator later needs to restore more than 100 new files to library LIBA, but does not want to have the journaling started for these newly restored files.

What is the fastest way to restore the files without starting the journaling?

A. Use the CHGJRN command to change the inherit rules for library LIBA and then perform the restore.

B. Restore the files to library LIBA and then manually end the journaling for the newly restored files.

C. Use the CHGJRNOBJ command to change the inherit rules for library LIBA and then perform the restore.

D. Use the command sequence ENDJRNLIB, STRJRNLIB, with new inherit rules for library LIBA and then perform the restore.

Correct Answer: C

QUESTION NO: 125

Which two checks can be made to ensure that the correct specifications for IBM Tivoli Storage

Manager V6.2 (TSM) have been met? (Choose two.)

A. run the TSM Spec application andcheck for errors

B. run TSM until errors are produced or crashes occur

C. run the TSMsyscheck application and check for errors

D. perform an analysis of the TSM system using benchmark tools

E. check the IBM website for OS, software, and hardware compatibility

Answer: D,E

QUESTION NO: 2

While installing the IBM Sterling Selling and Fulfillment Suite in the GUI mode, the installation fails

with an error indicating a user permission issue on the database schema. On researching the

issue, it is discovered that the user has not been granted “CREATE TABLE” permission on the

schema. The database administrator who can provide access is not accessible until the end of the

week. Which statement is true regarding the application installation procedure?

A. The installation has to be rerun from the beginning after the permission has been granted to the

user.

B. The IBM Sterling Selling and Fulfillment Suite should be re-installed with the option to use the

database bundled along with it.

C. The installation can be run in a mode such that it does not connect to the database and the

database scripts can be run later when thepermission issue is resolved.

D. Since the issue is only a permissions issue, the installation can be run with a parameter in the

silent file so it would ignore such errors andcomplete the installation successfully.

Answer: C

Explanation:

QUESTION NO:16

Companycom has a 16 way 1.65 GHz p5 590 and wants to install a i5/OS partition on their

server. The customer wants to keep installation costs to a minimum by sharing devices between

all LPARs. Before the operating system can be installed in this partition, the customer was told

that there are certain limitations that must be observed. What are these limitations?

A. When the i5/OS partition is housed in the p5 590, the HMC allows seamless installation in a

partition as long as the minimum one processor, 256 MB of memory, one Ethernet and one

boot adapter/disk is available from internal hardware.

B. V5R3 and later releases of i5/OS can be installed on a POWER5 server partition. Only one

processor can be assigned to the i5/OS. A special expansion tower must be ordered. This

expansion tower and its devices can be shared with other OS partitions.

C. When the i5/OS partition is housed in the p5 590, the 5250 Twinaxial console must be used to

set up the partition. Only one processor can be assigned to the i5/OS partition. A special

expansion tower must be ordered to house the IOPs. Devices in the special expansion tower

can be shared with other Linux partitions.

D. V5R3 and later releases of i5/OS can be installed on IBM eServer p5 servers. i5/OS can run

on two processors in the p5 590. A special expansion tower must be ordered. This expansion

tower and its devices cannot be shared with other OS partitions. The iSeries expansion towers

are seen by the IBM eServer p5 server as an I/O subsystem.

Answer: D

QUESTION NO:22

A customer wants to consolidate storage from four IBM System p servers and one large IBM System i

server on a high end disk subsystem. The customer does not have a SAN installed. The customer will

require approximately 24 TB of capacity for System p and 20 TB of capacity for System i. The customer

states that performance of the System i system is most important. Capacity, multi-path access, and

replication functions are important for the System p servers. Which solution best satisfies the customer

requirements?

A. IBM DS8700 with 600 GB drives for the System p, 300 GB/15k drives for Systemi; and advanced

functions for System p capacity

B. IBM DS8700 with LPAR, 300 GB/15k drives and RAID 10 for Systemi; and 600GB drives with RAID 5

and advanced functions for System p capacity

C.

IBM DS8700 with advanced functions, 300 GB/15k drives and RAID 10 for Systemi performance; and

600 GB drives and RAID 5 for System p capacity

D. IBM DS5100 with Enhanced Remote Mirror, 600GB/15k drives and RAID 5 for System p; and

300GB/15k drives and RAID 10 for Systemi capacity

ExamReal.com — 100% Real QandAs | 100% Real Pass

Correct Answer: C

QUESTION NO: 92

An IBM Tivoli Storage Manager (TSM) administrator has changed positions within a company and

is no longer responsible for TSM functions. Which command is used to prevent the administrator

from administering TSM?

A. REVOKE PRIVILEGE

B. REMOVE PRIVILEGE

C. REVOKE AUTHORITY

D. REMOVE AUTHORITY

Answer: C

QUESTION NO:74

The solution implementer is configuring a multi-protocol gateway service to parse the following

message.

What request type should the solution implementer choose?

A. XML

B. JSON

C. JSONX

D. Pass through

Answer: B

Explanation:

QUESTION NO:37

A company has stated that a supervisor search is required within a number of activities for their Office

Requisition Process. A BPM application developer has chosen to implement this search within a coach

view using AJAX. Refer to the variable declarations of the coach view below.

The configuration option retrieveSupervisors is of Type Service. Assuming that the AJAX function

parameters are properly specified within the variable serviceArgs, how would the developer invoke the

100% Real QandAs | 100% Real Pass

AJAX service within the appropriate coach view event handler?

A. this.context.options.RetrieveSupervisors(serviceArgs);

B. this.context.options.retrieveSupervisors(serviceArgs);

C. this.context.options.get(“RetrieveSupervisors”, serviceArgs);

D. this.context.options.get(“retrieveSupervisors”, serviceArgs);

Correct Answer: B

QUESTION NO:163

A Worklight developer is having trouble with the XSL file that transforms the raw XML feed from a public

RSS server into JSON data to be consumed by a mobile application. What is the correct use of Worklight’s

debugging features to resolve this problem?

A. Use the adapter’s Invoke Worklight Back-end Service tool to edit the XSL file based on the raw XML

and corresponding JSON data.

B. Use the adapter’s Invoke Worklight Procedure tool to retrieve the raw XML and corresponding JSON

data for comparison with the XSL file.

C.

Use the adapter’s Invoke Worklight Back-end Service and Invoke Worklight Procedure tools to

compare the raw XML andcorresponding JSON data.

D. Use the adapter’s Deploy Worklight Adapter option to deploy the adapter into the Worklight Console,

then use the Console’s Previewfeature to debug the adapter.

Correct Answer: A

QUESTION NO:48

A service needs to be configured on the DataPower appliance to allow a client to share access to a private

resource. This sharing must be done without the sharing of user credentials. A solution implementer has

decided to implement an OAuth solution for the customer. Which of the following are available to the

solution implementer to implement OAuth? (choose 3)

A. AAA action

B. SSL proxy profile

C. Web Token Service

D. 1-legged authentication

E. OAuth client and OAuth client group

F. OAuth open source DataPower plug-in

Correct Answer: ACE